Optical measurements of flyer plate acceleration by emulsion explosive

Shiro Kubota, Hideki Shimada, Kikuo Matsui, Yuji Ogata, Masahiro Seto, Akira Masui, Yuji Wada, Zhi yue Liu, Shigeru Itoh

研究成果: Contribution to journalArticle査読

抄録

This paper presents the study on the application of explosive welding technique to the field of the urgent repair of the gas and water pipe networks. The essential parameters related to the explosive welding are scrutinized from the point of view of the minimizing the damage to the steel pipe after welded explosively with a flyer plate. The emulsion explosive is contained in a rectangular hard-paper box whose bottom is the flyer plate with 100 mm length, 25 mm width and 1.5 mm thickness. The flyer motions of the flyer plates accelerated by emulsion explosive are observed by high-speed photography from the side and front view of the flyer plate. The damage to the pipe by the flyer plate is discussed with the results of the observation of flyer motion and explosive welding test under various experimental conditions. Moreover, one way to control the motion of the flyer plate is proposed. We put a PMMA buffer block into the explosive. The flying process of flyer plate is calculated by the finite different sc heme based on the ALE method. The effectiveness of this method is demonstrated by the experimental and numerical studies.

本文言語英語
ページ(範囲)771-778
ページ数8
ジャーナルProceedings of SPIE - The International Society for Optical Engineering
4183
1
DOI
出版ステータス出版済み - 4 17 2001

All Science Journal Classification (ASJC) codes

  • 電子材料、光学材料、および磁性材料
  • 凝縮系物理学
  • コンピュータ サイエンスの応用
  • 応用数学
  • 電子工学および電気工学

フィンガープリント

「Optical measurements of flyer plate acceleration by emulsion explosive」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル