Overall hydrogen permeation through fluidized pbli alloy under natural convection

Satoshi Fukada, Makoto Okada, Yuki Edao, Hiroaki Okitsu, Shunsuke Yoshimura

研究成果: ジャーナルへの寄稿記事

3 引用 (Scopus)

抄録

Hydrogen permeation is investigated in a conjugated system of Li 15.8Pb84.2 eutectic alloy or Ar under natural convection inside a cylindrical vertical sus316 tube. Two different temperature conditions are made between the upper and lower parts of the vertical tube. When thermal convection in Pb-Li or Ar with inside temperature distribution is fast, the rate-determining step for overall permeation rate is considered H2 permeation through the sus316 tube wall maintained at the lower temperature. On the contrary, when the inside convection is slow, the convection affects the transient behavior of overall H2 permeation rates. The analytical result was consistent with experimental ones of the Ar convection system. However, the steady-state overall H2 permeation rate for the Pb-Li system was much higher than the value estimated from the intrinsic permeability of sus316, and the values changed gradually with elapsed time. This may be because hydrogen is present as an atomic state in the Li17Pb 83 convection layer with different temperatures, and bubbles on interfaces affect permeation. The overall H2 permeation rates under various temperature conditions are compared, and the effect of thermal convection is discussed.

元の言語英語
ページ(範囲)636-640
ページ数5
ジャーナルFusion Science and Technology
64
発行部数3
DOI
出版物ステータス出版済み - 1 1 2013

Fingerprint

Natural convection
Permeation
free convection
Hydrogen
convection
hydrogen
tubes
eutectic alloys
Temperature
temperature
permeability
temperature distribution
bubbles
Eutectics
Convection
Temperature distribution

All Science Journal Classification (ASJC) codes

  • Civil and Structural Engineering
  • Nuclear and High Energy Physics
  • Nuclear Energy and Engineering
  • Materials Science(all)
  • Mechanical Engineering

これを引用

Overall hydrogen permeation through fluidized pbli alloy under natural convection. / Fukada, Satoshi; Okada, Makoto; Edao, Yuki; Okitsu, Hiroaki; Yoshimura, Shunsuke.

:: Fusion Science and Technology, 巻 64, 番号 3, 01.01.2013, p. 636-640.

研究成果: ジャーナルへの寄稿記事

Fukada, S, Okada, M, Edao, Y, Okitsu, H & Yoshimura, S 2013, 'Overall hydrogen permeation through fluidized pbli alloy under natural convection', Fusion Science and Technology, 巻. 64, 番号 3, pp. 636-640. https://doi.org/10.13182/FST13-A19163
Fukada, Satoshi ; Okada, Makoto ; Edao, Yuki ; Okitsu, Hiroaki ; Yoshimura, Shunsuke. / Overall hydrogen permeation through fluidized pbli alloy under natural convection. :: Fusion Science and Technology. 2013 ; 巻 64, 番号 3. pp. 636-640.
@article{4736b4b5175d4d2eb299175064d19f14,
title = "Overall hydrogen permeation through fluidized pbli alloy under natural convection",
abstract = "Hydrogen permeation is investigated in a conjugated system of Li 15.8Pb84.2 eutectic alloy or Ar under natural convection inside a cylindrical vertical sus316 tube. Two different temperature conditions are made between the upper and lower parts of the vertical tube. When thermal convection in Pb-Li or Ar with inside temperature distribution is fast, the rate-determining step for overall permeation rate is considered H2 permeation through the sus316 tube wall maintained at the lower temperature. On the contrary, when the inside convection is slow, the convection affects the transient behavior of overall H2 permeation rates. The analytical result was consistent with experimental ones of the Ar convection system. However, the steady-state overall H2 permeation rate for the Pb-Li system was much higher than the value estimated from the intrinsic permeability of sus316, and the values changed gradually with elapsed time. This may be because hydrogen is present as an atomic state in the Li17Pb 83 convection layer with different temperatures, and bubbles on interfaces affect permeation. The overall H2 permeation rates under various temperature conditions are compared, and the effect of thermal convection is discussed.",
author = "Satoshi Fukada and Makoto Okada and Yuki Edao and Hiroaki Okitsu and Shunsuke Yoshimura",
year = "2013",
month = "1",
day = "1",
doi = "10.13182/FST13-A19163",
language = "English",
volume = "64",
pages = "636--640",
journal = "Fusion Science and Technology",
issn = "1536-1055",
publisher = "American Nuclear Society",
number = "3",

}

TY - JOUR

T1 - Overall hydrogen permeation through fluidized pbli alloy under natural convection

AU - Fukada, Satoshi

AU - Okada, Makoto

AU - Edao, Yuki

AU - Okitsu, Hiroaki

AU - Yoshimura, Shunsuke

PY - 2013/1/1

Y1 - 2013/1/1

N2 - Hydrogen permeation is investigated in a conjugated system of Li 15.8Pb84.2 eutectic alloy or Ar under natural convection inside a cylindrical vertical sus316 tube. Two different temperature conditions are made between the upper and lower parts of the vertical tube. When thermal convection in Pb-Li or Ar with inside temperature distribution is fast, the rate-determining step for overall permeation rate is considered H2 permeation through the sus316 tube wall maintained at the lower temperature. On the contrary, when the inside convection is slow, the convection affects the transient behavior of overall H2 permeation rates. The analytical result was consistent with experimental ones of the Ar convection system. However, the steady-state overall H2 permeation rate for the Pb-Li system was much higher than the value estimated from the intrinsic permeability of sus316, and the values changed gradually with elapsed time. This may be because hydrogen is present as an atomic state in the Li17Pb 83 convection layer with different temperatures, and bubbles on interfaces affect permeation. The overall H2 permeation rates under various temperature conditions are compared, and the effect of thermal convection is discussed.

AB - Hydrogen permeation is investigated in a conjugated system of Li 15.8Pb84.2 eutectic alloy or Ar under natural convection inside a cylindrical vertical sus316 tube. Two different temperature conditions are made between the upper and lower parts of the vertical tube. When thermal convection in Pb-Li or Ar with inside temperature distribution is fast, the rate-determining step for overall permeation rate is considered H2 permeation through the sus316 tube wall maintained at the lower temperature. On the contrary, when the inside convection is slow, the convection affects the transient behavior of overall H2 permeation rates. The analytical result was consistent with experimental ones of the Ar convection system. However, the steady-state overall H2 permeation rate for the Pb-Li system was much higher than the value estimated from the intrinsic permeability of sus316, and the values changed gradually with elapsed time. This may be because hydrogen is present as an atomic state in the Li17Pb 83 convection layer with different temperatures, and bubbles on interfaces affect permeation. The overall H2 permeation rates under various temperature conditions are compared, and the effect of thermal convection is discussed.

UR - http://www.scopus.com/inward/record.url?scp=84885104063&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84885104063&partnerID=8YFLogxK

U2 - 10.13182/FST13-A19163

DO - 10.13182/FST13-A19163

M3 - Article

AN - SCOPUS:84885104063

VL - 64

SP - 636

EP - 640

JO - Fusion Science and Technology

JF - Fusion Science and Technology

SN - 1536-1055

IS - 3

ER -