Phase and morphology evolution study of ball milled Mg-Co hydrogen storage alloys

Huaiyu Shao; Junko Matsuda; Hai Wen Li; Etsuo Akiba; Ankur Jain; Takayuki Ichikawa; Yoshitsugu Kojima

doi:10.1016/j.ijhydene.2013.04.026

Phase and morphology evolution study of ball milled Mg-Co hydrogen storage alloys

Huaiyu Shao, Junko Matsuda, Hai Wen Li, Etsuo Akiba, Ankur Jain, Takayuki Ichikawa, Yoshitsugu Kojima

水素利用工学

研究成果: Contribution to journal › Article › 査読

35 被引用数 (Scopus)

抄録

Ball milled Mg-Co alloys with body-centered cubic structure (BCC) may absorb hydrogen at 258 K with a hydrogen capacity around 3 mass%. The phase and morphology evolution process of Mg₅₀Co₅₀ alloys ball milled for 0.5 h-400 h was studied by X-ray diffraction and scanning electron microscope. The formation mechanism of the Mg₅₀Co₅₀ alloys was clarified. Mg₅₀Co₅₀ alloys ball milled for various durations were found to present different hydrogen storage properties which could result from the phase and morphology difference in these samples.

本文言語	英語
ページ（範囲）	7070-7076
ページ数	7
ジャーナル	International Journal of Hydrogen Energy
巻	38
号	17
DOI	https://doi.org/10.1016/j.ijhydene.2013.04.026
出版ステータス	出版済み - 6 10 2013

All Science Journal Classification (ASJC) codes

Renewable Energy, Sustainability and the Environment
Fuel Technology
Condensed Matter Physics
Energy Engineering and Power Technology

文献へのアクセス

10.1016/j.ijhydene.2013.04.026

他のファイルとリンク

フィンガープリント「Phase and morphology evolution study of ball milled Mg-Co hydrogen storage alloys」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル

@article{2d3cda98cc5b4cdaa411dd1635b086cb,

title = "Phase and morphology evolution study of ball milled Mg-Co hydrogen storage alloys",

abstract = "Ball milled Mg-Co alloys with body-centered cubic structure (BCC) may absorb hydrogen at 258 K with a hydrogen capacity around 3 mass%. The phase and morphology evolution process of Mg50Co50 alloys ball milled for 0.5 h-400 h was studied by X-ray diffraction and scanning electron microscope. The formation mechanism of the Mg50Co50 alloys was clarified. Mg50Co50 alloys ball milled for various durations were found to present different hydrogen storage properties which could result from the phase and morphology difference in these samples.",

author = "Huaiyu Shao and Junko Matsuda and Li, {Hai Wen} and Etsuo Akiba and Ankur Jain and Takayuki Ichikawa and Yoshitsugu Kojima",

note = "Funding Information: The authors acknowledge support from the International Institute for Carbon-Neutral Energy Research ( WPI-I2CNER ), which was established by the World Premier International Research Center Initiative (WPI), MEXT, Japan. This work was also supported in part by Japan Society for the Promotion of Science (JSPS) KAKENHI ( 23860034 , 07F07567 ). ",

year = "2013",

month = jun,

day = "10",

doi = "10.1016/j.ijhydene.2013.04.026",

language = "English",

volume = "38",

pages = "7070--7076",

journal = "International Journal of Hydrogen Energy",

issn = "0360-3199",

publisher = "Elsevier Limited",

number = "17",

}

TY - JOUR

T1 - Phase and morphology evolution study of ball milled Mg-Co hydrogen storage alloys

AU - Shao, Huaiyu

AU - Matsuda, Junko

AU - Li, Hai Wen

AU - Akiba, Etsuo

AU - Jain, Ankur

AU - Ichikawa, Takayuki

AU - Kojima, Yoshitsugu

N1 - Funding Information: The authors acknowledge support from the International Institute for Carbon-Neutral Energy Research ( WPI-I2CNER ), which was established by the World Premier International Research Center Initiative (WPI), MEXT, Japan. This work was also supported in part by Japan Society for the Promotion of Science (JSPS) KAKENHI ( 23860034 , 07F07567 ).

PY - 2013/6/10

Y1 - 2013/6/10

N2 - Ball milled Mg-Co alloys with body-centered cubic structure (BCC) may absorb hydrogen at 258 K with a hydrogen capacity around 3 mass%. The phase and morphology evolution process of Mg50Co50 alloys ball milled for 0.5 h-400 h was studied by X-ray diffraction and scanning electron microscope. The formation mechanism of the Mg50Co50 alloys was clarified. Mg50Co50 alloys ball milled for various durations were found to present different hydrogen storage properties which could result from the phase and morphology difference in these samples.

AB - Ball milled Mg-Co alloys with body-centered cubic structure (BCC) may absorb hydrogen at 258 K with a hydrogen capacity around 3 mass%. The phase and morphology evolution process of Mg50Co50 alloys ball milled for 0.5 h-400 h was studied by X-ray diffraction and scanning electron microscope. The formation mechanism of the Mg50Co50 alloys was clarified. Mg50Co50 alloys ball milled for various durations were found to present different hydrogen storage properties which could result from the phase and morphology difference in these samples.

UR - http://www.scopus.com/inward/record.url?scp=84878109090&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84878109090&partnerID=8YFLogxK

U2 - 10.1016/j.ijhydene.2013.04.026

DO - 10.1016/j.ijhydene.2013.04.026

M3 - Article

AN - SCOPUS:84878109090

VL - 38

SP - 7070

EP - 7076

JO - International Journal of Hydrogen Energy

JF - International Journal of Hydrogen Energy

SN - 0360-3199

IS - 17

ER -