Phase separation behavior and coloring of coating glasses for sanitary ware

Yoshikazu Tomioka, Sohei Sukenaga, Noritaka Saito, Kunihiko Nakashima

    研究成果: Contribution to journalConference article査読

    2 被引用数 (Scopus)

    抄録

    We investigated the phase separation behavior of multi-component oxide glasses for coating layer of sanitary wares, and the holding time dependence of the microstructure and the coloring nature of phase separated glasses. Two kinds of multi-component silicate glasses (CaO-SiO2-Al2O 3-MgO-ZnO-K2O-Na2O system) were employed, which had different CaO/SiO2 ratio. Glass A has higher CaO/SiO2 ratio, and glass B has lower CaO/SiO2. Quenched glasses that were pre-melted at 1550 °C for 90 min in advance, were isothermally held at 800∼1100 °C for 0.5∼2 h by the hot-thermocouple. The microstructure of phase-separated glass was observed by using FE-SEM on the polished section. It was found that the glass A and B heat-treated at given temperatures indicated a spinodal and a binodal type phase separation, respectively. Moreover, the glass A was found to have the larger microstructure of phase separation, which caused whitish color. In contrast, the glass B revealed the finer binodal phase separation that resulted in a bluish phase separated glass.

    本文言語英語
    論文番号112021
    ジャーナルIOP Conference Series: Materials Science and Engineering
    18
    SYMPOSIUM 8
    DOI
    出版ステータス出版済み - 8 31 2011
    イベント3rd International Congress on Ceramics, ICC3 - Osaka, 日本
    継続期間: 11 14 201011 18 2010

    All Science Journal Classification (ASJC) codes

    • 材料科学(全般)
    • 工学(全般)

    フィンガープリント

    「Phase separation behavior and coloring of coating glasses for sanitary ware」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル