Phase stabilization by ultra grain refinement inmetastable austenite

Setsuo Takaki, Kazuhiro Fukunaga, Junaidi Syarif, Toshihiro Tsuchitama

    研究成果: Contribution to conferencePaper査読

    1 被引用数 (Scopus)

    抄録

    When steels have a high martensitic transformation temperature above room temperature, the transformation behavior is not affected by the difference in the austenite (y) grain size, because they have a large chemical driving force for the martensitic transformation. However, in the case of metastable γ phase, the stability of γ depends on they grain size because the chemical driving force is not so large that the nucleation of martensite is affected by the size of room. In this paper, the behavior of martensitic transformation was investigated in a metastable austenitic steel (13Cr-11Ni steel) with different grain size from 0.8μm to 80μm and the mechanism of γ phase stabilization was discussed in connection with the morphological change of martensite. As a result, it was found that ultra grain refinement to the revel of submicron causes a change in the transformation mechanism from "multi variant" to "single variant" and that the difficulty of single variant transformation leads to the phase stabilization of γ.

    本文言語英語
    ページ259-266
    ページ数8
    出版ステータス出版済み - 12 1 2005
    イベントInternational Conference on Solid-Solid Phase Transformations in Inorganic Materials 2005 - Phoenix, AZ, 米国
    継続期間: 5 29 20056 3 2005

    その他

    その他International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2005
    国/地域米国
    CityPhoenix, AZ
    Period5/29/056/3/05

    All Science Journal Classification (ASJC) codes

    • 工学(全般)

    フィンガープリント

    「Phase stabilization by ultra grain refinement inmetastable austenite」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル