Plasma-enhanced metal organic chemical vapor deposition of high purity copper thin films using plasma reactor with the H atom source

Hong Jie Jin, Masaharu Shiratani, Takashi Kawasaki, Tsuyoshi Fukuzawa, Toshio Kinoshita, Yukio Watanabe, Hiroharu Kawasaki, Masaharu Toyofuku

研究成果: Contribution to journalArticle査読

25 被引用数 (Scopus)

抄録

In situ Fourier-transform infrared measurements have been carried out to study the effects of H atoms on removing impurities in Cu thin films during plasma enhanced metal organic chemical vapor deposition (PEMOCVD) using bis(hexafluoroacetylacetonato) copper (II), Cu(hfac)2 as a source material. The results show that H atoms are very effective in removing impurities in the film, as well as on its surface. Based on such knowledge regarding the effects of H atoms, a PEMOCVD reactor equipped with an H atom source is developed to control both densities of H atoms and Cu-contained radicals independently. High purity (≈ 100%) Cu films of a low resistivity of 2 μΩ cm can be deposited for a H2 gas volume fraction of 50%-67% by using the H atom source, while the high purity films were obtained only for a very high H2 gas volume fraction above about 90% in the case of no H atom source as reported previously. This feature opens up a possibility of deposition of high quality Cu films at a high rate using the reactor equipped with the H atom source, since a gas volume fraction of Cu metal organic material can be increased by more than five times.

本文言語英語
ページ(範囲)726-730
ページ数5
ジャーナルJournal of Vacuum Science and Technology A: Vacuum, Surfaces and Films
17
3
DOI
出版ステータス出版済み - 1 1 1999

All Science Journal Classification (ASJC) codes

  • Condensed Matter Physics
  • Surfaces and Interfaces
  • Surfaces, Coatings and Films

フィンガープリント 「Plasma-enhanced metal organic chemical vapor deposition of high purity copper thin films using plasma reactor with the H atom source」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル