Preparation and properties of SnO-SnCl2-P2O5 glass

Kenji Morinaga, Shigeru Fujino

    研究成果: ジャーナルへの寄稿Conference article

    40 引用 (Scopus)


    The glass forming region in the ternary system SnO-SnCl2-P2O5 has been determined. Glass transition temperature (Tg), dilatomeric softening temperature (Ts) of the glass, and the viscosity of the liquids in the binary SnO-P2O5 and SnCl2-P2O5 systems were measured. Compositional dependencies of these properties have been investigated. The Tg and Ts of the glasses and the viscosity of liquids for the SnO-P2O5 glasses increase linearly with increasing SnO content in a range of 40-60 mol% SnO. The substitution of chlorine for oxygen by increasing the SnCl2/SnO ratio results in a decrease of Tg and Ts of the glasses and the viscosity of the liquids. The Tg and Ts of the glasses and the viscosity of the liquids of the SnCl2-P2O5 system increase between 40 and 60 mol% SnCl2, are a maximum at about 60 mol% SnCl2, and then decrease with further addition. The SnCl2-P2O5 systems had a decreasing viscosity, which is not observed in the SnO-P2O5 and SnF2-P2O5 systems. The 70SnCl2-30P2O5 glass, having a viscosity between 0.4 and 10 Pa s in a temperature range of 500-600 K, would be useful in a practical application for sealing glasses.

    ジャーナルJournal of Non-Crystalline Solids
    出版物ステータス出版済み - 4 1 2001


    All Science Journal Classification (ASJC) codes

    • Electronic, Optical and Magnetic Materials
    • Ceramics and Composites
    • Condensed Matter Physics
    • Materials Chemistry