Preparation and structure of mesophase pitch-based thin carbon tape

I. Mochida, Seong Ho Yoon, Y. Korai

研究成果: Contribution to journalArticle査読

6 被引用数 (Scopus)

抄録

A mesophase pitch of 100 vol % anisotropy prepared from methylnaphthalene using HF/BF3 was spun through a slit-shaped nozzle, stabilized in air under strain and carbonized at 1300°C into a very thin slit-shaped carbon tape 1.6 μm thick and 14 μm wide. Better crystalline orientation of the carbon tape always provided a Bacon anisotropic factor higher by 2% than that of the circular carbon fibre prepared from the same pitch. Excellent mechanical properties of the present carbon tape were obtained. Factors influencing the shape and orientation of the carbon tape were examined in terms of properties of mesophase pitches, spinning temperature, and the extent and strain of stabilization.

本文言語英語
ページ(範囲)2135-2140
ページ数6
ジャーナルJournal of Materials Science
28
8
DOI
出版ステータス出版済み - 1 1993

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

フィンガープリント 「Preparation and structure of mesophase pitch-based thin carbon tape」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル