Preparation of high-strength coke by carbonization of hot-briquetted Victorian brown coal

Aska Mori, Sousuke Kubo, Shinji Kudo, Koyo Norinaga, Tetsuya Kanai, Hideyuki Aoki, Jun Ichiro Hayashi

研究成果: Contribution to journalArticle査読

19 被引用数 (Scopus)

抄録

Cokes with tensile strengths of 6-37 MPa were prepared by binderless briquetting and subsequent carbonization up to 900 °C of pulverized Victorian brown coal that had little fluidity and very low reflectance. Application of mechanical pressures of 64-128 MPa at temperatures of 130-200 °C caused softening of the coal because of mobilization of both low- and high-molecular-mass components, deformation of the coal matrix, and then coalescence/bonding of particles. The resulting coke had a density as high as 1.1-1.3 g/cm 3 and tensile strength of 28-37 MPa, which was 5-6 times that of conventional metallurgical coke.

本文言語英語
ページ(範囲)296-301
ページ数6
ジャーナルEnergy and Fuels
26
1
DOI
出版ステータス出版済み - 1 19 2012

All Science Journal Classification (ASJC) codes

  • 化学工学(全般)
  • 燃料技術
  • エネルギー工学および電力技術

フィンガープリント

「Preparation of high-strength coke by carbonization of hot-briquetted Victorian brown coal」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル