Preparation of highly crystalline nanofibers on Fe and Fe-Ni catalysts with a variety of graphene plane alignments

Atsushi Tanaka, Seong Ho Yoon, Isao Mochida

研究成果: ジャーナルへの寄稿学術誌査読

76 被引用数 (Scopus)

抄録

The present study confirmed that highly crystalline nanofibers with controlled structure may be prepared over Fe and Fe-Ni alloy catalysts. The degree of graphitization of various carbon nanofibers (CNFs) was analyzed by using C(0 0 2) peaks from the XRD profiles. The C(002) peaks of CNFs over Fe catalyst shifted to higher angle and became narrower as the preparation temperature increased from 560 to 620 °C. Tubular CNFs prepared at temperature higher than 630 °C showed lower 2θ angles compared to those of platelet fibers. CNFs prepared over Fe-Ni catalysts tended to resemble those prepared over Fe catalysts. The degree of graphitization of platelet CNFs resembled natural graphite, while d002 of the tubular CNFs showed values below the 3.39 Å reported as a theoretical minimum for a cylindrical alignment. Lc0 0 2 of platelet and tubular CNFs increased by heat treatment at 2000 and 2800 °C though d0 0 2 changed little. A transverse section of platelet and tubular CNFs had a hexagonal shape, not a round shape. The hexagonal column allows AB stacking of hexagonal planes that can give perfect hexagonal alignment.

本文言語英語
ページ(範囲)591-597
ページ数7
ジャーナルCarbon
42
3
DOI
出版ステータス出版済み - 2004

!!!All Science Journal Classification (ASJC) codes

  • 化学 (全般)
  • 材料科学(全般)

フィンガープリント

「Preparation of highly crystalline nanofibers on Fe and Fe-Ni catalysts with a variety of graphene plane alignments」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル