Preparation of low-crystalline apatite nanoparticles and their coating onto quartz substrates

Masakazu Kawashita, Koji Taninai, Zhixia Li, Kunio Ishikawa, Yasuhiro Yoshida

研究成果: Contribution to journalArticle査読

5 被引用数 (Scopus)

抄録

We prepared low-crystalline apatite nanoparticles and coated them onto a surface of a Au/Cr-plated quartz substrate by the electrophoretic deposition (EPD) method or by using a self-assembled monolayer of 11-mercaptoundecanoic acid (SAM method). Low-crystalline apatite nanoparticles around 10 nm in size with extremely low contents of undesirable residual products were obtained by adding (NH4)2HPO4 aqueous droplets into a modified synthetic body fluid solution that contained Ca(CH3COO) 2. The apatite nanoparticles were successfully coated by either the EPD method or the SAM method; the nanoparticle coating achieved by the SAM method was more uniform than that achieved by the EPD method. The present SAM method is expected to be a promising technique for obtaining a quartz substrate coated with apatite nanoparticles, which can be used as a quartz crystal microbalance device.

本文言語英語
ページ(範囲)1355-1362
ページ数8
ジャーナルJournal of Materials Science: Materials in Medicine
23
6
DOI
出版ステータス出版済み - 6 2012

All Science Journal Classification (ASJC) codes

  • Biophysics
  • Bioengineering
  • Biomaterials
  • Biomedical Engineering

フィンガープリント 「Preparation of low-crystalline apatite nanoparticles and their coating onto quartz substrates」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル