Preparation of porous La(Sr)Ti(Fe)O3 perovskite oxide tube by filament-winding method

Akihiro Kawahara, Yousuke Takahashi, Yuji Hirano, Masayoshi Hirano, Tatsumi Ishihara

    研究成果: ジャーナルへの寄稿学術誌査読

    抄録

    Porous ceramic tubes consisting of La0.7Sr0.3Ti 0.7Fe0.3O3 (LSTF) perovskite oxide was investigated in this study by using Filament-Winding (FW) method. When methacrylic acid with molecular weight of 50000 was used for organic binder, LSTF fiber with 0.5 mm in diameter and 15 m in length can be obtained by extrusion method. Although the mechanical strength of the obtained LSTF fiber was lower than that of the polymer fiber used for FW method, the obtained LSTF fiber showed reasonably large strength and expand ratio. As a result, LSTF porous tube can be obtained by FW method and calcination at 1673 K. Comparing with the porous tube prepared by a conventional sintering method, it was found that the obtained LSTF tube showed much larger porosity (ca. 80 %) and large air permeation rate.

    本文言語英語
    ページ(範囲)252-255
    ページ数4
    ジャーナルElectrochemistry
    79
    4
    DOI
    出版ステータス出版済み - 4月 2011

    !!!All Science Journal Classification (ASJC) codes

    • 電気化学

    フィンガープリント

    「Preparation of porous La(Sr)Ti(Fe)O3 perovskite oxide tube by filament-winding method」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル