Preparation of superconducting multilayer structure for power electronic devices

K. Shingai, Yukihiko Yamagata, T. Ikegami, K. Ebihara

研究成果: Contribution to journalArticle査読


Multi-step KrF excimer pulsed laser deposition (MSPLD) technique has been developed to fabricate high-quality micrometer thick superconducting YBa2Cu3O7-x (YBCO) films. As has been shown, a crystallization of YBCO at the initial stage of deposition crucially affects on thick YBCO film performance. Smooth, c-axis oriented 1-μm thick YBCO films with the critical temperature of Tc(zero) = 89.5 K and the overall critical current density of Jc(77 K) = 105 A/cm2 have been prepared on the single crystal MgO substrate in three-step process by monitoring the laser fluence, laser repetition rate and substrate temperature. Micrometer thick YBCO films on the single crystal LaAlO3 substrate show Tc(zero) = 85.7 K and Jc(77 K) = 103 A/cm2, indicating that optimization of MSPLD processing conditions is much more critical for substrates with a small substrate/film lattice mismatch. Furthermore, Pb(Zr,Ti)O3(PZT)/YBa2Cu3O7-x/MgO heterostructures have been prepared by MSPLD technique with the critical temperature of Tc(zero) = 82.0 K in superconducting YBCO layer.

ジャーナルThin Solid Films
出版ステータス出版済み - 4 15 1998

All Science Journal Classification (ASJC) codes

  • 電子材料、光学材料、および磁性材料
  • 表面および界面
  • 表面、皮膜および薄膜
  • 金属および合金
  • 材料化学


「Preparation of superconducting multilayer structure for power electronic devices」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。