Production of functional microtool using size-classified gel-microbeads

Benoît Chapurlat, Hisataka Maruyama, Yoko Yamanishi, Kyosuke Kotani, Fumihito Arai

研究成果: 著書/レポートタイプへの貢献会議での発言

抄録

In this study, we succeeded in producing functional microtool made of gel-microbead using size-dependent microparticle classification. Gel-microbead, which is used as the material for the microtool, is made by salting-out of hydrophilic photo-crosslinkable resin, ENT-3400. These gel-microbeads were separated according to their size by microfüters made of polydimethylsiloxane (PDMS). A first on is a row of fluidic micro-channels which block microbeads with a size over the width of the channel. Another filtering method has been experimented, using Magnetically driven Micro Tool (MMT) to separate the beads using the centrifugal force created by this MMT actuated with a DC motor. Separated gel-microbeads were recovered after filtering step and then used to fabricate functional microtools, for example tether-shaped gel-tool, by contact to other gel-microbeads under UV illumination. Produced gel-tool is manipulated by optical tweezers in a microchip. We succeeded in getting size-dependent separation of the gel-microbeads and production of the tether-shaped gel-tool.

元の言語英語
ホスト出版物のタイトル2008 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2008, with Symposium on "COE for Education and Research of Micro-Nano Mechatronics"
ページ237-242
ページ数6
DOI
出版物ステータス出版済み - 12 1 2008
イベント2008 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2008, with Symposium on "COE for Education and Research of Micro-Nano Mechatronics", Symposium on "System Cell Engineering by Multi-scale Manipulation" - Nagoya, 日本
継続期間: 11 6 200811 9 2008

出版物シリーズ

名前2008 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2008

その他

その他2008 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2008, with Symposium on "COE for Education and Research of Micro-Nano Mechatronics", Symposium on "System Cell Engineering by Multi-scale Manipulation"
日本
Nagoya
期間11/6/0811/9/08

Fingerprint

Gels
Optical tweezers
DC motors
Fluidics
Polydimethylsiloxane
Resins
Lighting

All Science Journal Classification (ASJC) codes

  • Computer Vision and Pattern Recognition
  • Human-Computer Interaction
  • Electrical and Electronic Engineering

これを引用

Chapurlat, B., Maruyama, H., Yamanishi, Y., Kotani, K., & Arai, F. (2008). Production of functional microtool using size-classified gel-microbeads. : 2008 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2008, with Symposium on "COE for Education and Research of Micro-Nano Mechatronics" (pp. 237-242). [4752456] (2008 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2008). https://doi.org/10.1109/MHS.2008.4752456

Production of functional microtool using size-classified gel-microbeads. / Chapurlat, Benoît; Maruyama, Hisataka; Yamanishi, Yoko; Kotani, Kyosuke; Arai, Fumihito.

2008 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2008, with Symposium on "COE for Education and Research of Micro-Nano Mechatronics". 2008. p. 237-242 4752456 (2008 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2008).

研究成果: 著書/レポートタイプへの貢献会議での発言

Chapurlat, B, Maruyama, H, Yamanishi, Y, Kotani, K & Arai, F 2008, Production of functional microtool using size-classified gel-microbeads. : 2008 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2008, with Symposium on "COE for Education and Research of Micro-Nano Mechatronics"., 4752456, 2008 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2008, pp. 237-242, 2008 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2008, with Symposium on "COE for Education and Research of Micro-Nano Mechatronics", Symposium on "System Cell Engineering by Multi-scale Manipulation", Nagoya, 日本, 11/6/08. https://doi.org/10.1109/MHS.2008.4752456
Chapurlat B, Maruyama H, Yamanishi Y, Kotani K, Arai F. Production of functional microtool using size-classified gel-microbeads. : 2008 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2008, with Symposium on "COE for Education and Research of Micro-Nano Mechatronics". 2008. p. 237-242. 4752456. (2008 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2008). https://doi.org/10.1109/MHS.2008.4752456
Chapurlat, Benoît ; Maruyama, Hisataka ; Yamanishi, Yoko ; Kotani, Kyosuke ; Arai, Fumihito. / Production of functional microtool using size-classified gel-microbeads. 2008 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2008, with Symposium on "COE for Education and Research of Micro-Nano Mechatronics". 2008. pp. 237-242 (2008 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2008).
@inproceedings{ab5d9cde721940588d03bd57ccdc047e,
title = "Production of functional microtool using size-classified gel-microbeads",
abstract = "In this study, we succeeded in producing functional microtool made of gel-microbead using size-dependent microparticle classification. Gel-microbead, which is used as the material for the microtool, is made by salting-out of hydrophilic photo-crosslinkable resin, ENT-3400. These gel-microbeads were separated according to their size by microf{\"u}ters made of polydimethylsiloxane (PDMS). A first on is a row of fluidic micro-channels which block microbeads with a size over the width of the channel. Another filtering method has been experimented, using Magnetically driven Micro Tool (MMT) to separate the beads using the centrifugal force created by this MMT actuated with a DC motor. Separated gel-microbeads were recovered after filtering step and then used to fabricate functional microtools, for example tether-shaped gel-tool, by contact to other gel-microbeads under UV illumination. Produced gel-tool is manipulated by optical tweezers in a microchip. We succeeded in getting size-dependent separation of the gel-microbeads and production of the tether-shaped gel-tool.",
author = "Beno{\^i}t Chapurlat and Hisataka Maruyama and Yoko Yamanishi and Kyosuke Kotani and Fumihito Arai",
year = "2008",
month = "12",
day = "1",
doi = "10.1109/MHS.2008.4752456",
language = "English",
isbn = "9781424429196",
series = "2008 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2008",
pages = "237--242",
booktitle = "2008 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2008, with Symposium on {"}COE for Education and Research of Micro-Nano Mechatronics{"}",

}

TY - GEN

T1 - Production of functional microtool using size-classified gel-microbeads

AU - Chapurlat, Benoît

AU - Maruyama, Hisataka

AU - Yamanishi, Yoko

AU - Kotani, Kyosuke

AU - Arai, Fumihito

PY - 2008/12/1

Y1 - 2008/12/1

N2 - In this study, we succeeded in producing functional microtool made of gel-microbead using size-dependent microparticle classification. Gel-microbead, which is used as the material for the microtool, is made by salting-out of hydrophilic photo-crosslinkable resin, ENT-3400. These gel-microbeads were separated according to their size by microfüters made of polydimethylsiloxane (PDMS). A first on is a row of fluidic micro-channels which block microbeads with a size over the width of the channel. Another filtering method has been experimented, using Magnetically driven Micro Tool (MMT) to separate the beads using the centrifugal force created by this MMT actuated with a DC motor. Separated gel-microbeads were recovered after filtering step and then used to fabricate functional microtools, for example tether-shaped gel-tool, by contact to other gel-microbeads under UV illumination. Produced gel-tool is manipulated by optical tweezers in a microchip. We succeeded in getting size-dependent separation of the gel-microbeads and production of the tether-shaped gel-tool.

AB - In this study, we succeeded in producing functional microtool made of gel-microbead using size-dependent microparticle classification. Gel-microbead, which is used as the material for the microtool, is made by salting-out of hydrophilic photo-crosslinkable resin, ENT-3400. These gel-microbeads were separated according to their size by microfüters made of polydimethylsiloxane (PDMS). A first on is a row of fluidic micro-channels which block microbeads with a size over the width of the channel. Another filtering method has been experimented, using Magnetically driven Micro Tool (MMT) to separate the beads using the centrifugal force created by this MMT actuated with a DC motor. Separated gel-microbeads were recovered after filtering step and then used to fabricate functional microtools, for example tether-shaped gel-tool, by contact to other gel-microbeads under UV illumination. Produced gel-tool is manipulated by optical tweezers in a microchip. We succeeded in getting size-dependent separation of the gel-microbeads and production of the tether-shaped gel-tool.

UR - http://www.scopus.com/inward/record.url?scp=62449135433&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=62449135433&partnerID=8YFLogxK

U2 - 10.1109/MHS.2008.4752456

DO - 10.1109/MHS.2008.4752456

M3 - Conference contribution

AN - SCOPUS:62449135433

SN - 9781424429196

T3 - 2008 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2008

SP - 237

EP - 242

BT - 2008 International Symposium on Micro-NanoMechatronics and Human Science, MHS 2008, with Symposium on "COE for Education and Research of Micro-Nano Mechatronics"

ER -