Progress in R&D of coated conductor in M-PACC project

T. Izumi, A. Ibi, K. Nakaoka, T. Taneda, T. Yoshida, Y. Takagi, T. Nakamura, T. Machi, K. Katayama, N. Sakai, M. Yoshizumi, T. Koizumi, K. Kimura, T. Kato, T. Kiss, Y. Shiohara

研究成果: ジャーナルへの寄稿学術誌査読

1 被引用数 (Scopus)

抄録

The five-year national project in Japan for R&D of coated conductors and applications, named as the Materials and Power Applications of Coated Conductors (M-PACC) project, was finished at the end of FY2013. The project consists of four sub-themes as cable, transformer, SMES and coated conductors. In the theme of coated conductors, the fabrication process had been developed to satisfy the requirements from the applications such as in-field Ic performance, low AC loss in the long tapes etc. Through the project, the remarkable progress was achieved as follows; a high in-field minimum Ic value over 54A/cm-width under 3T at 77K was realized in a 200m long EuBCO tape with artificial pinning centers of BaHfO3 by the pulsed laser deposition (PLD) technique on the IBAD template. On the other hand, the AC loss reduction was confirmed in the tapes fabricated by both PLD and the metal organic deposition (MOD) techniques by scribing 100m tapes into 10-filamments. Additionally, the mechanism of the delamination phenomenon was systematically investigated and the strength was improved by eliminating the origins of the weak points in the films. Through the development, all targeted goals were accomplished and the several results were appreciated as a world champion data.

本文言語英語
ページ(範囲)1-6
ページ数6
ジャーナルProgress in Superconductivity and Cryogenics (PSAC)
16
2
DOI
出版ステータス出版済み - 2014

!!!All Science Journal Classification (ASJC) codes

  • 電子材料、光学材料、および磁性材料
  • 電子工学および電気工学

フィンガープリント

「Progress in R&D of coated conductor in M-PACC project」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル