Projector Camera System for Realtime 3 D Scanning

Hiroshi Kawasaki, Inose Kenji, Ryo Furukawa, Ryusuke Sagawa, Yasushi Yagi

研究成果: Chapter in Book/Report/Conference proceedingConference contribution

2 被引用数 (Scopus)

抄録

An active 3D scanning device which can capture a sequential motion in realtime is strongly demanded for 3D display and other VR systems. Since most previous and commercial products basically recover the shape with a point or a line for each scan, fast motion can not be captured in principle. One solution for the purpose is to use a single pattern (one shot scan). However, they often have stability problems and their result tend to have low resolution. In our recent study, we have developed a system which achieved dense and accurate 3D reconstruction from only a single image. The proposed system also had the advantage of being robust in terms of image processing. In this presentation, we introduce outline of our system, several applications and results.

本文言語英語
ホスト出版物のタイトルPROCAMS 2008 - ACM/IEEE 5th International Workshop on Projector Camera Systems
DOI
出版ステータス出版済み - 2008
外部発表はい
イベントACM/IEEE 5th International Workshop on Projector Camera Systems, PROCAMS 2008 - Marina del Rey, CA, 米国
継続期間: 8 10 20088 10 2008

出版物シリーズ

名前PROCAMS 2008 - ACM/IEEE 5th International Workshop on Projector Camera Systems

その他

その他ACM/IEEE 5th International Workshop on Projector Camera Systems, PROCAMS 2008
Country米国
CityMarina del Rey, CA
Period8/10/088/10/08

All Science Journal Classification (ASJC) codes

  • Hardware and Architecture
  • Electrical and Electronic Engineering

フィンガープリント 「Projector Camera System for Realtime 3 D Scanning」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル