Properties of MDF panels manufactured with foam-type UF resinadhesive

Ming Yu Wen, Hee Jun Park, Seung Won Oh, Chun Won Kang, Jung Woo Hwang, Junji Matsumura

研究成果: Contribution to journalArticle査読

1 被引用数 (Scopus)

抄録

The mechanical properties, dimensional stability, and sound absorption ability of MDF panels manufactured with developed foam-type urea-Formaldehyde (UF) resin adhesives were investigated. The cure characteristics of resins were determined by differential scanning calorimetry analysis (DSC), and the reined fibers and the porosity of the MDF panel were observed by SEM. MDF panels prepared with A foam-type UF resin had better mechanical properties and dimensional stability, even better than control MDF panels. However, there was no significant difference in sound absorption ability among panels. DSC analysis revealed that A foam-type UF had a lower onset and peak temperature and a slightly sharper peak curve. In addition, it was observed by SEM that much more A foam-type UF resin adhesive agglomerated on the fiber surface, exhibiting better foaming effect, and that the porosity of the MDF panel was reduced, further confirming the foam effect.

本文言語英語
ページ(範囲)133-136
ページ数4
ジャーナルJournal of the Faculty of Agriculture, Kyushu University
59
1
出版ステータス出版済み - 2 1 2014

All Science Journal Classification (ASJC) codes

  • バイオテクノロジー
  • 農業および作物学

フィンガープリント

「Properties of MDF panels manufactured with foam-type UF resinadhesive」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル