Proposal of a face gear which generates virtual high mesh frequency by addition of grooves on the tooth flank, and the investigation via vibration simulator and actual samples

Tetsuo Inoue, Syuhei Kurokawa

研究成果: ジャーナルへの寄稿学術誌査読

3 被引用数 (Scopus)

抄録

This report discusses the method of tooth flank modification of a face gear which improves the handle rotational feeling in a fishing reel. A vibration based on a gear pair engagement in fishing reel occurs when a handle of the reel rotates. When this vibration is large, an angler feels uncomfortable, and it is known that the rotational feeling strongly depends on the transmission error of a face gear which is mounted on the reel. In this report, a new method of tooth flank modification was proposed. Based on the new method, it is possible to increase the mesh frequency while keeping the module size and the outer diameter of the face gear unchanged. In this method, several grooves were added along the contact curve on the tooth flank of the face gear. The influence on vibration by these grooves was investigated using the vibration simulator which was introduced in the author's previous reports. Moreover, sample face gears were manufactured and the rotational feeling was evaluated. As a result, it was confirmed that the rotational feeling was improved by applying a proper number of grooves and groove width.

本文言語英語
ページ(範囲)321-332
ページ数12
ジャーナルPrecision Engineering
47
DOI
出版ステータス出版済み - 1月 1 2017

!!!All Science Journal Classification (ASJC) codes

  • 工学(全般)

フィンガープリント

「Proposal of a face gear which generates virtual high mesh frequency by addition of grooves on the tooth flank, and the investigation via vibration simulator and actual samples」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル