疲労破面直下の塑性ひずみを用いた荷重推定法の提案

甲斐田 健人, 小山 元道, 濱田 繁, 桜田 栄作, 横井 龍雄, 野口 博司

研究成果: Contribution to journalArticle

抄録

<p>Striations are observed on the fracture surface of the broken metal material, and the working load has been estimated from its interval. However, striation is not always observed, and in that case, the fatigue crack propagation rate cannot be estimated by the conventional method. At the fatigue crack tip, the plastic zone formed during tensile loading is compressed into the surrounding elastic zone during unloading. From this fact, it is considered that the crack propagation rate is closely related to plastic strain distribution. In this study, we used a Fe-3Al bcc single crystalline alloy and the plastic strain just under the fracture surface was investigated. Using ECCI method and EBSD method in the different stress intensity factor range, the change of the inclination of dislocation wall near the fracture surface and the crystal orientation gradient is measured, and the possibility of the estimation of the applied stress using the microstructure near the fatigue fracture surface is examined. As for the dislocation structure, it is shown that there is a boundary where the dislocation wall tilts when a new slip system starts to work as the observation region approaches the fracture surface. And, it was proven that the distance from the fracture surface to the boundary changed with the Δ<i>K</i> value. And, this paper indicates the possibility of obtaining useful information for fatigue fracture analysis such as Δ<i>K</i> by investigating the region in which dislocation wall exists. As for the crystal orientation gradient, there was a decrease of GROD value near the fracture surface, and this seemed to be the effect of the cyclic plasticity region. It is also shown that the GROD values can be qualitatively evaluated by the difference of Δ<i>K</i> values.</p>
寄稿の翻訳タイトルProposal of load estimation method using plastic strain under fatigue fracture surface
本文言語日本語
ページ(範囲)OS0332
ジャーナルM&M材料力学カンファレンス
2019
0
DOI
出版ステータス出版済み - 2019

フィンガープリント

「疲労破面直下の塑性ひずみを用いた荷重推定法の提案」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル