Proposed Simple Determination Method for Welding Condition of Joint from Fatigue Limit Characteristics (1st Report: Application to TIG-Butt-Joint of Non-combustible Mg Alloy):(1st Report: Application to TIG-Butt-Joint of Non-combustible Mg Alloy)

Shigeru Hamada, Taka-aki Kawazoe, Komei Hayashi, Harumi Morita, Mitsuji Ueda, Michiru Sakamoto, Hiroshi Noguchi

研究成果: Contribution to journalArticle査読

抄録

The non-combustible Mg alloy is useful as a structural material because of its high specific strength and high ignition point, but its suitable welding conditions have not been established for manufacturing floors. In this study, a simple evaluation method for the fatigue limit characteristics of a welded joint was proposed using the edge shape of the welding bead geometry, the internal defect size and the material characteristics. Moreover, the welding condition parameter ranges to insure a stable fatigue limit for the TIG butt joint of a non-combustible Mg alloy were proposed using this method.
本文言語英語
ページ(範囲)409-424
ページ数16
ジャーナルJournal of Solid Mechanics and Materials Engineering
5
8
DOI
出版ステータス出版済み - 2011

フィンガープリント 「Proposed Simple Determination Method for Welding Condition of Joint from Fatigue Limit Characteristics (1st Report: Application to TIG-Butt-Joint of Non-combustible Mg Alloy):(1st Report: Application to TIG-Butt-Joint of Non-combustible Mg Alloy)」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル