Quantitative wear estimation for mooring chain of floating structures and its validation

Takaaki Takeuchi, Tomoaki Utsunomiya, Koji Gotoh, Iku Sato

研究成果: Chapter in Book/Report/Conference proceedingConference contribution

抄録

For reducing maintenance cost of floating offshore wind turbine structures, it is necessary to establish quantitative wear estimation method for the mooring chains. In this paper, attempts have been made to improve the accuracy and applicability of the estimation method in the following steps. By using the wear analysis method between the links of mooring chain that Gotoh et al. investigated with the finite element analysis software (MSC. Marc), the expression of the wear amount was obtained, which was a proportional functional form associated with sliding angle and tension. The relative sliding angle and tension between links were analyzed by using a multibody dynamics software (MSC. Adams). A spar-type floater moored with three catenary mooring lines at Goto, Nagasaki prefecture, Japan was analyzed. Here, the floating body was modelled as a rigid body and mooring chains were modelled by mass-spring (lumped mass) model. From these results, the wear amounts calculated by using the estimation formula and relative sliding angle and tension between links were compared with the measured wear amounts for mooring chain of the floater which was deployed for about one-year at Goto. The cases with only waves and those with wind and waves were analyzed. From the comparison between the simulation results and the measured ones, it was found that the proposed method can fairly predict the wear amount of mooring chains. However, it was also found that the proposed method has a tendency to overestimate the measured results. These reasons were discussed in the paper.

本文言語英語
ホスト出版物のタイトルOcean Space Utilization
出版社American Society of Mechanical Engineers (ASME)
ISBN(電子版)9780791858837
DOI
出版ステータス出版済み - 1 1 2019
イベントASME 2019 38th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2019 - Glasgow, 英国
継続期間: 6 9 20196 14 2019

出版物シリーズ

名前Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE
6

会議

会議ASME 2019 38th International Conference on Ocean, Offshore and Arctic Engineering, OMAE 2019
Country英国
CityGlasgow
Period6/9/196/14/19

All Science Journal Classification (ASJC) codes

  • Ocean Engineering
  • Energy Engineering and Power Technology
  • Mechanical Engineering

フィンガープリント 「Quantitative wear estimation for mooring chain of floating structures and its validation」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル