Quenching of a stainless-steel rod with a honeycomb porous plate in artificial seawater

Wilton Fogaça, Shoji Mori

研究成果: 著書/レポートタイプへの貢献会議での発言

抄録

The prime concern during a severe accident scenario in a nuclear power plant is to prevent leakage of radioactive material. In case of a fuel meltdown accident, as part of in-vessel retention (IVR) efforts, the reactor pressure vessel cavity is flooded with fresh water to decrease the temperature of the reactor pressure vessel wall, preserving its structural integrity. Improving IVR safety margin requires shortening of the quenching time and enhancement of the critical heat flux (CHF). This work investigates and compares the performance of artificial seawater and distilled water for quenching of a stainless-steel cylinder with a honeycomb porous plate (HPP) attached to the heated surface. Experiments, at atmospheric pressure and saturated condition, with both fluids on the bare surface (BS) and with an HPP with 10 mm in height attached were performed. On the BS, artificial seawater presented a quenching time 13-times shorter than that of distilled water due to a much shorter film boiling region, due to an unstable vapor film and localized solid-liquid contact. When the HPP was employed, the quenching times for both fluids were significantly reduced due to its capillary properties and the separation of liquid and vapor phases near the heated surface. With the HPP, the quenching time in distilled water was reduced by approximately 9-times (from 859 s to 99 s) and in artificial seawater it was decreased from 67 s to 20 s. The best performance observed in the latter case resulted from the absence of film boiling. After experiments in artificial seawater the presence of irregular distributed sea-salts deposits was observed on the cylinder surface. These deposits can improve the capillarity of the surface, what translated in a higher quenching performance for this fluid.

元の言語英語
ホスト出版物のタイトルProceedings of the 27th International Conference on Nuclear Engineering, ICONE 2019 - "Nuclear Power Saves the World!"
出版者American Society of Mechanical Engineers (ASME)
ISBN(印刷物)9784888982566
出版物ステータス出版済み - 5 18 2019
外部発表Yes
イベント27th International Conference on Nuclear Engineering: Nuclear Power Saves the World!, ICONE 2019 - Tsukuba, Ibaraki, 日本
継続期間: 5 19 20195 24 2019

出版物シリーズ

名前International Conference on Nuclear Engineering, Proceedings, ICONE
2019-May

会議

会議27th International Conference on Nuclear Engineering: Nuclear Power Saves the World!, ICONE 2019
日本
Tsukuba, Ibaraki
期間5/19/195/24/19

Fingerprint

Porous plates
Seawater
Quenching
Stainless steel
Pressure vessels
Boiling liquids
Fluids
Water
Accidents
Vapors
Salt deposits
Radioactive materials
Capillarity
Liquids
Structural integrity
Contacts (fluid mechanics)
Nuclear power plants
Atmospheric pressure
Heat flux
Deposits

All Science Journal Classification (ASJC) codes

  • Nuclear Energy and Engineering

これを引用

Fogaça, W., & Mori, S. (2019). Quenching of a stainless-steel rod with a honeycomb porous plate in artificial seawater. : Proceedings of the 27th International Conference on Nuclear Engineering, ICONE 2019 - "Nuclear Power Saves the World!" (International Conference on Nuclear Engineering, Proceedings, ICONE; 巻数 2019-May). American Society of Mechanical Engineers (ASME).

Quenching of a stainless-steel rod with a honeycomb porous plate in artificial seawater. / Fogaça, Wilton; Mori, Shoji.

Proceedings of the 27th International Conference on Nuclear Engineering, ICONE 2019 - "Nuclear Power Saves the World!". American Society of Mechanical Engineers (ASME), 2019. (International Conference on Nuclear Engineering, Proceedings, ICONE; 巻 2019-May).

研究成果: 著書/レポートタイプへの貢献会議での発言

Fogaça, W & Mori, S 2019, Quenching of a stainless-steel rod with a honeycomb porous plate in artificial seawater. : Proceedings of the 27th International Conference on Nuclear Engineering, ICONE 2019 - "Nuclear Power Saves the World!". International Conference on Nuclear Engineering, Proceedings, ICONE, 巻. 2019-May, American Society of Mechanical Engineers (ASME), 27th International Conference on Nuclear Engineering: Nuclear Power Saves the World!, ICONE 2019, Tsukuba, Ibaraki, 日本, 5/19/19.
Fogaça W, Mori S. Quenching of a stainless-steel rod with a honeycomb porous plate in artificial seawater. : Proceedings of the 27th International Conference on Nuclear Engineering, ICONE 2019 - "Nuclear Power Saves the World!". American Society of Mechanical Engineers (ASME). 2019. (International Conference on Nuclear Engineering, Proceedings, ICONE).
Fogaça, Wilton ; Mori, Shoji. / Quenching of a stainless-steel rod with a honeycomb porous plate in artificial seawater. Proceedings of the 27th International Conference on Nuclear Engineering, ICONE 2019 - "Nuclear Power Saves the World!". American Society of Mechanical Engineers (ASME), 2019. (International Conference on Nuclear Engineering, Proceedings, ICONE).
@inproceedings{57d88f7606424009aeccaaa1e8cd11db,
title = "Quenching of a stainless-steel rod with a honeycomb porous plate in artificial seawater",
abstract = "The prime concern during a severe accident scenario in a nuclear power plant is to prevent leakage of radioactive material. In case of a fuel meltdown accident, as part of in-vessel retention (IVR) efforts, the reactor pressure vessel cavity is flooded with fresh water to decrease the temperature of the reactor pressure vessel wall, preserving its structural integrity. Improving IVR safety margin requires shortening of the quenching time and enhancement of the critical heat flux (CHF). This work investigates and compares the performance of artificial seawater and distilled water for quenching of a stainless-steel cylinder with a honeycomb porous plate (HPP) attached to the heated surface. Experiments, at atmospheric pressure and saturated condition, with both fluids on the bare surface (BS) and with an HPP with 10 mm in height attached were performed. On the BS, artificial seawater presented a quenching time 13-times shorter than that of distilled water due to a much shorter film boiling region, due to an unstable vapor film and localized solid-liquid contact. When the HPP was employed, the quenching times for both fluids were significantly reduced due to its capillary properties and the separation of liquid and vapor phases near the heated surface. With the HPP, the quenching time in distilled water was reduced by approximately 9-times (from 859 s to 99 s) and in artificial seawater it was decreased from 67 s to 20 s. The best performance observed in the latter case resulted from the absence of film boiling. After experiments in artificial seawater the presence of irregular distributed sea-salts deposits was observed on the cylinder surface. These deposits can improve the capillarity of the surface, what translated in a higher quenching performance for this fluid.",
author = "Wilton Foga{\cc}a and Shoji Mori",
year = "2019",
month = "5",
day = "18",
language = "English",
isbn = "9784888982566",
series = "International Conference on Nuclear Engineering, Proceedings, ICONE",
publisher = "American Society of Mechanical Engineers (ASME)",
booktitle = "Proceedings of the 27th International Conference on Nuclear Engineering, ICONE 2019 - {"}Nuclear Power Saves the World!{"}",

}

TY - GEN

T1 - Quenching of a stainless-steel rod with a honeycomb porous plate in artificial seawater

AU - Fogaça, Wilton

AU - Mori, Shoji

PY - 2019/5/18

Y1 - 2019/5/18

N2 - The prime concern during a severe accident scenario in a nuclear power plant is to prevent leakage of radioactive material. In case of a fuel meltdown accident, as part of in-vessel retention (IVR) efforts, the reactor pressure vessel cavity is flooded with fresh water to decrease the temperature of the reactor pressure vessel wall, preserving its structural integrity. Improving IVR safety margin requires shortening of the quenching time and enhancement of the critical heat flux (CHF). This work investigates and compares the performance of artificial seawater and distilled water for quenching of a stainless-steel cylinder with a honeycomb porous plate (HPP) attached to the heated surface. Experiments, at atmospheric pressure and saturated condition, with both fluids on the bare surface (BS) and with an HPP with 10 mm in height attached were performed. On the BS, artificial seawater presented a quenching time 13-times shorter than that of distilled water due to a much shorter film boiling region, due to an unstable vapor film and localized solid-liquid contact. When the HPP was employed, the quenching times for both fluids were significantly reduced due to its capillary properties and the separation of liquid and vapor phases near the heated surface. With the HPP, the quenching time in distilled water was reduced by approximately 9-times (from 859 s to 99 s) and in artificial seawater it was decreased from 67 s to 20 s. The best performance observed in the latter case resulted from the absence of film boiling. After experiments in artificial seawater the presence of irregular distributed sea-salts deposits was observed on the cylinder surface. These deposits can improve the capillarity of the surface, what translated in a higher quenching performance for this fluid.

AB - The prime concern during a severe accident scenario in a nuclear power plant is to prevent leakage of radioactive material. In case of a fuel meltdown accident, as part of in-vessel retention (IVR) efforts, the reactor pressure vessel cavity is flooded with fresh water to decrease the temperature of the reactor pressure vessel wall, preserving its structural integrity. Improving IVR safety margin requires shortening of the quenching time and enhancement of the critical heat flux (CHF). This work investigates and compares the performance of artificial seawater and distilled water for quenching of a stainless-steel cylinder with a honeycomb porous plate (HPP) attached to the heated surface. Experiments, at atmospheric pressure and saturated condition, with both fluids on the bare surface (BS) and with an HPP with 10 mm in height attached were performed. On the BS, artificial seawater presented a quenching time 13-times shorter than that of distilled water due to a much shorter film boiling region, due to an unstable vapor film and localized solid-liquid contact. When the HPP was employed, the quenching times for both fluids were significantly reduced due to its capillary properties and the separation of liquid and vapor phases near the heated surface. With the HPP, the quenching time in distilled water was reduced by approximately 9-times (from 859 s to 99 s) and in artificial seawater it was decreased from 67 s to 20 s. The best performance observed in the latter case resulted from the absence of film boiling. After experiments in artificial seawater the presence of irregular distributed sea-salts deposits was observed on the cylinder surface. These deposits can improve the capillarity of the surface, what translated in a higher quenching performance for this fluid.

UR - http://www.scopus.com/inward/record.url?scp=85071362436&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85071362436&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:85071362436

SN - 9784888982566

T3 - International Conference on Nuclear Engineering, Proceedings, ICONE

BT - Proceedings of the 27th International Conference on Nuclear Engineering, ICONE 2019 - "Nuclear Power Saves the World!"

PB - American Society of Mechanical Engineers (ASME)

ER -