Ratio-to-Digital Converter (RDC) for the Correction of the Effect of Position Signal's Timing Non-Linearity

M. M. Rashid, A. Nohtomi, Y. Uozumi, T. Sakae, M. Matoba

研究成果: Contribution to journalArticle査読

抄録

A resistive anode of a single wire position sensitive proportional counter (SWPC) is a diffusive RC line due to the distributed resistance and capacitance along the line. The timing of position signal at the end of the anode varies with the position of ionization. The delay of the position signal with reference to intrinsic zero position signal as well as with reference to the sum signal is estimated. Due to the presence of a timing non-linearity between the position signal and the sum signal, the position information determined by the existing RDC shows a non-linear characteristic. A new RDC has been developed which completely eliminates the deviation of position information originating from the input signal's timing non-linearity.

本文言語英語
ページ(範囲)800-804
ページ数5
ジャーナルIEEE Transactions on Nuclear Science
40
4
DOI
出版ステータス出版済み - 8 1993

All Science Journal Classification (ASJC) codes

  • 核物理学および高エネルギー物理学
  • 原子力エネルギーおよび原子力工学
  • 電子工学および電気工学

フィンガープリント

「Ratio-to-Digital Converter (RDC) for the Correction of the Effect of Position Signal's Timing Non-Linearity」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル