Recent results of divertor simulation research using an end-cell of a large tandem mirror device

Y. Nakashima, H. Takeda, K. Ichimura, K. Hosoi, M. Sakamoto, M. Hirata, M. Ichimura, R. Ikezoe, T. Imai, T. Ishii, T. Kariya, I. Katanuma, J. Kohagura, R. Minami, T. Numakura, H. Ueda, M. Yoshikawa, N. Asakura, T. Furuta, A. HatayamaY. Hirooka, S. Kado, S. Masuzaki, H. Matsuura, S. Nagata, N. Nishino, N. Ohno, A. Sagara, T. Shikama, M. Shoji, M. Toma, A. Tonegawa, Y. Ueda

研究成果: Contribution to journalArticle査読

24 被引用数 (Scopus)

抄録

This paper describes the results of characterization of high heat and particle fluxes produced at the end-cell of the large tandem mirror GAMMA 10 and of the initial plasma-irradiation experiments. In the case of ICRF plasmas, the heat flux of 0.8 MW/m2 and the particle flux of 4 × 10 22/m2 s were achieved at the end-mirror exit. The heat flux increases with the ICRF power and has a linear relationship with the stored energy. Direct ion energy analysis clarified that the parallel ion temperature can be controlled from 100 eV to 400 eV by changing the ICRF power. Additional plasma heating using another ICRF system in the anchor-cell significantly increases the particle flux, which gives a clear prospect of generating the higher particle flux by applying additional ICRF heating in the neighboring cells. The initial results of the plasma-gas-material interactions on a new V-shaped tungsten target were also reported.

本文言語英語
ページ(範囲)S738-S741
ジャーナルJournal of Nuclear Materials
438
SUPPL
DOI
出版ステータス出版済み - 1 1 2013
外部発表はい

All Science Journal Classification (ASJC) codes

  • Nuclear and High Energy Physics
  • Materials Science(all)
  • Nuclear Energy and Engineering

フィンガープリント 「Recent results of divertor simulation research using an end-cell of a large tandem mirror device」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル