Recovery guidance for the high speed flight demonstration vehicle

Masaaki Yanagihara, Yoshikazu Miyazawa, Toshio Akimoto, Masakazu Sagisaka

研究成果: 会議への寄与タイプ論文

抄録

A High-Speed Flight Demonstration (HSFD) program is planned as part of research for the HOPE-X unmanned re-entry vehicle project. The program consists of two phases, and the objective of Phase II is to estimate the transonic aerodynamic characteristics of the HOPE-X configuration. The experimental method for Phase n is highly unique: the experiment vehicle is to be lifted to high altitude by a stratospheric balloon, from which it will be released and accelerate in free fall. During data acquisition, the vehicle will fly at a constant Mach number. After data acquisition, the vehicle will be recovered using parachute and airbag systems, and refurbished for the next flight. The flight of the vehicle is fully autonomous under the navigation, guidance and control (GNC) of its on-board computer, and it is one of important missions for the GNC system to guide the vehicle to a designated recovery point with final flight conditions suitable for deploying a recovery parachute. A guidance system which satisfies this requirement was designed and a six degree-of-freedom flight simulation analysis including mathematical model errors was carried out to evaluate it. The results show that the vehicle can be guided to the target point within the required accuracy by the designed guidance system.

元の言語英語
出版物ステータス出版済み - 12 1 2001
イベント16th AIAA Aerodynamic Decelerator Systems Technology Conference and Seminar, 2001 - Boston, MA, 米国
継続期間: 5 21 20015 24 2001

その他

その他16th AIAA Aerodynamic Decelerator Systems Technology Conference and Seminar, 2001
米国
Boston, MA
期間5/21/015/24/01

Fingerprint

Demonstrations
Recovery
Parachutes
Data acquisition
Transonic aerodynamics
Upper atmosphere
Electronic guidance systems
Reentry
Balloons
Printed circuit boards
Mach number
Navigation
Mathematical models
Control systems
Experiments

All Science Journal Classification (ASJC) codes

  • Aerospace Engineering
  • Electrical and Electronic Engineering
  • Mechanical Engineering

これを引用

Yanagihara, M., Miyazawa, Y., Akimoto, T., & Sagisaka, M. (2001). Recovery guidance for the high speed flight demonstration vehicle. 論文発表場所 16th AIAA Aerodynamic Decelerator Systems Technology Conference and Seminar, 2001, Boston, MA, 米国.

Recovery guidance for the high speed flight demonstration vehicle. / Yanagihara, Masaaki; Miyazawa, Yoshikazu; Akimoto, Toshio; Sagisaka, Masakazu.

2001. 論文発表場所 16th AIAA Aerodynamic Decelerator Systems Technology Conference and Seminar, 2001, Boston, MA, 米国.

研究成果: 会議への寄与タイプ論文

Yanagihara, M, Miyazawa, Y, Akimoto, T & Sagisaka, M 2001, 'Recovery guidance for the high speed flight demonstration vehicle', 論文発表場所 16th AIAA Aerodynamic Decelerator Systems Technology Conference and Seminar, 2001, Boston, MA, 米国, 5/21/01 - 5/24/01.
Yanagihara M, Miyazawa Y, Akimoto T, Sagisaka M. Recovery guidance for the high speed flight demonstration vehicle. 2001. 論文発表場所 16th AIAA Aerodynamic Decelerator Systems Technology Conference and Seminar, 2001, Boston, MA, 米国.
Yanagihara, Masaaki ; Miyazawa, Yoshikazu ; Akimoto, Toshio ; Sagisaka, Masakazu. / Recovery guidance for the high speed flight demonstration vehicle. 論文発表場所 16th AIAA Aerodynamic Decelerator Systems Technology Conference and Seminar, 2001, Boston, MA, 米国.
@conference{b3f577db2805433c8cfaaf836edc9faf,
title = "Recovery guidance for the high speed flight demonstration vehicle",
abstract = "A High-Speed Flight Demonstration (HSFD) program is planned as part of research for the HOPE-X unmanned re-entry vehicle project. The program consists of two phases, and the objective of Phase II is to estimate the transonic aerodynamic characteristics of the HOPE-X configuration. The experimental method for Phase n is highly unique: the experiment vehicle is to be lifted to high altitude by a stratospheric balloon, from which it will be released and accelerate in free fall. During data acquisition, the vehicle will fly at a constant Mach number. After data acquisition, the vehicle will be recovered using parachute and airbag systems, and refurbished for the next flight. The flight of the vehicle is fully autonomous under the navigation, guidance and control (GNC) of its on-board computer, and it is one of important missions for the GNC system to guide the vehicle to a designated recovery point with final flight conditions suitable for deploying a recovery parachute. A guidance system which satisfies this requirement was designed and a six degree-of-freedom flight simulation analysis including mathematical model errors was carried out to evaluate it. The results show that the vehicle can be guided to the target point within the required accuracy by the designed guidance system.",
author = "Masaaki Yanagihara and Yoshikazu Miyazawa and Toshio Akimoto and Masakazu Sagisaka",
year = "2001",
month = "12",
day = "1",
language = "English",
note = "16th AIAA Aerodynamic Decelerator Systems Technology Conference and Seminar, 2001 ; Conference date: 21-05-2001 Through 24-05-2001",

}

TY - CONF

T1 - Recovery guidance for the high speed flight demonstration vehicle

AU - Yanagihara, Masaaki

AU - Miyazawa, Yoshikazu

AU - Akimoto, Toshio

AU - Sagisaka, Masakazu

PY - 2001/12/1

Y1 - 2001/12/1

N2 - A High-Speed Flight Demonstration (HSFD) program is planned as part of research for the HOPE-X unmanned re-entry vehicle project. The program consists of two phases, and the objective of Phase II is to estimate the transonic aerodynamic characteristics of the HOPE-X configuration. The experimental method for Phase n is highly unique: the experiment vehicle is to be lifted to high altitude by a stratospheric balloon, from which it will be released and accelerate in free fall. During data acquisition, the vehicle will fly at a constant Mach number. After data acquisition, the vehicle will be recovered using parachute and airbag systems, and refurbished for the next flight. The flight of the vehicle is fully autonomous under the navigation, guidance and control (GNC) of its on-board computer, and it is one of important missions for the GNC system to guide the vehicle to a designated recovery point with final flight conditions suitable for deploying a recovery parachute. A guidance system which satisfies this requirement was designed and a six degree-of-freedom flight simulation analysis including mathematical model errors was carried out to evaluate it. The results show that the vehicle can be guided to the target point within the required accuracy by the designed guidance system.

AB - A High-Speed Flight Demonstration (HSFD) program is planned as part of research for the HOPE-X unmanned re-entry vehicle project. The program consists of two phases, and the objective of Phase II is to estimate the transonic aerodynamic characteristics of the HOPE-X configuration. The experimental method for Phase n is highly unique: the experiment vehicle is to be lifted to high altitude by a stratospheric balloon, from which it will be released and accelerate in free fall. During data acquisition, the vehicle will fly at a constant Mach number. After data acquisition, the vehicle will be recovered using parachute and airbag systems, and refurbished for the next flight. The flight of the vehicle is fully autonomous under the navigation, guidance and control (GNC) of its on-board computer, and it is one of important missions for the GNC system to guide the vehicle to a designated recovery point with final flight conditions suitable for deploying a recovery parachute. A guidance system which satisfies this requirement was designed and a six degree-of-freedom flight simulation analysis including mathematical model errors was carried out to evaluate it. The results show that the vehicle can be guided to the target point within the required accuracy by the designed guidance system.

UR - http://www.scopus.com/inward/record.url?scp=84894596054&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84894596054&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:84894596054

ER -