Recrystallization texture and shear band formation in bending

Hiroshi Kaneko, Tatsuya Morikawa, Masaki Tanaka, Hirofumi Inoue, Kenji Higashida

    研究成果: Contribution to journalArticle査読

    抄録

    The influence of texture on the shear bands and workability in bending was examined by using an age-hardened polycrystalline high concentration of Ni-Si copper alloys with various recrystallization textures. Samples with dominant the Cube orientation of {001}〈100〉, the RD-rotated Cube orientation of {012}〈100〉, the BR orientation of {362}〈853〉, and the R orientation of {231}〈346〉 were employed. The formation of shear bands and the bending workability depended on the texture in the W-shape bending test, in which the bending direction was RD. The sample with a strongly developed Cube orientation showed the best bending workability. In comparison, the samples with the developed BR orientation and random orientation showed poor bending workability. The shape of the cracks generated by bending was linear, and these cracks developed in the shear bands, which were inclined at 35-40° from the surface. To elucidate the mechanism behind shear band formation, inhomogeneous deformations were investigated using the FE-SEM/EBSD method. The dependence on the crystallographic orientations was discussed using the full constraint Taylor model premising both the plane strain compression and the shear strain modes.

    本文言語英語
    ページ(範囲)218-224
    ページ数7
    ジャーナルMaterials Transactions
    58
    2
    DOI
    出版ステータス出版済み - 2017

    All Science Journal Classification (ASJC) codes

    • Materials Science(all)
    • Condensed Matter Physics
    • Mechanics of Materials
    • Mechanical Engineering

    フィンガープリント 「Recrystallization texture and shear band formation in bending」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル