Relationship between polydispersity of polymer glycols and mechanical properties of polyurethane elastomers

Yasuhiro Okuhara, Ken Kojio, Mutsuhisa Furukawa

研究成果: 著書/レポートタイプへの貢献会議での発言

抄録

A series of eight blend poly(oxytetramethylene) glycols (PTMGs) with different polydispersity were prepared from three kinds of PTMGs with the number-average molecular weights of 278 or 642,1004, and 1918. The PUEs were prepared from the blend polymer glycols, 4,4'-diphenylmethane diisocyanate and 1,4-butanediol by a prepolymer method. The hard segment content of all PUEs was ca. 37 wt%. Thermal and mechanical properties of the PUEs were characterized by hardness, density, swelling test, gel permeation chromatography, differential scanning calorimetry, dynamic viscoelastic properties measurements, and tensile testing. With a broadening polydispersity of the soft segment, Tg of the soft segment shifted to low temperature, indicating that the phase separation became stronger. This induced a increasing Young's modulus and hardness of PUEs. Tensile strength and strain at break for the PUEs including the lowest molecular weight component (PTMG250) showed larger and smaller magnitudes, respectively. This is because PTMG250 played as physical crosslinking points and made network structure become heterogeneous.

元の言語英語
ホスト出版物のタイトル54th SPSJ Annual Meeting 2005 - Polymer Preprints, Japan
ページ1279
ページ数1
54
エディション1
出版物ステータス出版済み - 2005
外部発表Yes
イベント54th SPSJ Annual Meeting 2005 - Yokohama, 日本
継続期間: 5 25 20055 27 2005

その他

その他54th SPSJ Annual Meeting 2005
日本
Yokohama
期間5/25/055/27/05

Fingerprint

Polydispersity
Glycols
Elastomers
Polyurethanes
Hardness
Molecular weight
Mechanical properties
Tensile strain
Tensile testing
Gel permeation chromatography
Polymers
Polymer blends
Phase separation
Crosslinking
Swelling
Differential scanning calorimetry
Tensile strength
Thermodynamic properties
Elastic moduli
Temperature

All Science Journal Classification (ASJC) codes

  • Engineering(all)

これを引用

Okuhara, Y., Kojio, K., & Furukawa, M. (2005). Relationship between polydispersity of polymer glycols and mechanical properties of polyurethane elastomers. : 54th SPSJ Annual Meeting 2005 - Polymer Preprints, Japan (1 版, 巻 54, pp. 1279)

Relationship between polydispersity of polymer glycols and mechanical properties of polyurethane elastomers. / Okuhara, Yasuhiro; Kojio, Ken; Furukawa, Mutsuhisa.

54th SPSJ Annual Meeting 2005 - Polymer Preprints, Japan. 巻 54 1. 編 2005. p. 1279.

研究成果: 著書/レポートタイプへの貢献会議での発言

Okuhara, Y, Kojio, K & Furukawa, M 2005, Relationship between polydispersity of polymer glycols and mechanical properties of polyurethane elastomers. : 54th SPSJ Annual Meeting 2005 - Polymer Preprints, Japan. 1 Edn, 巻. 54, pp. 1279, 54th SPSJ Annual Meeting 2005, Yokohama, 日本, 5/25/05.
Okuhara Y, Kojio K, Furukawa M. Relationship between polydispersity of polymer glycols and mechanical properties of polyurethane elastomers. : 54th SPSJ Annual Meeting 2005 - Polymer Preprints, Japan. 1 版 巻 54. 2005. p. 1279
Okuhara, Yasuhiro ; Kojio, Ken ; Furukawa, Mutsuhisa. / Relationship between polydispersity of polymer glycols and mechanical properties of polyurethane elastomers. 54th SPSJ Annual Meeting 2005 - Polymer Preprints, Japan. 巻 54 1. 版 2005. pp. 1279
@inproceedings{66cd4eb86d4647f6b7425395a7a1dea0,
title = "Relationship between polydispersity of polymer glycols and mechanical properties of polyurethane elastomers",
abstract = "A series of eight blend poly(oxytetramethylene) glycols (PTMGs) with different polydispersity were prepared from three kinds of PTMGs with the number-average molecular weights of 278 or 642,1004, and 1918. The PUEs were prepared from the blend polymer glycols, 4,4'-diphenylmethane diisocyanate and 1,4-butanediol by a prepolymer method. The hard segment content of all PUEs was ca. 37 wt{\%}. Thermal and mechanical properties of the PUEs were characterized by hardness, density, swelling test, gel permeation chromatography, differential scanning calorimetry, dynamic viscoelastic properties measurements, and tensile testing. With a broadening polydispersity of the soft segment, Tg of the soft segment shifted to low temperature, indicating that the phase separation became stronger. This induced a increasing Young's modulus and hardness of PUEs. Tensile strength and strain at break for the PUEs including the lowest molecular weight component (PTMG250) showed larger and smaller magnitudes, respectively. This is because PTMG250 played as physical crosslinking points and made network structure become heterogeneous.",
author = "Yasuhiro Okuhara and Ken Kojio and Mutsuhisa Furukawa",
year = "2005",
language = "English",
volume = "54",
pages = "1279",
booktitle = "54th SPSJ Annual Meeting 2005 - Polymer Preprints, Japan",
edition = "1",

}

TY - GEN

T1 - Relationship between polydispersity of polymer glycols and mechanical properties of polyurethane elastomers

AU - Okuhara, Yasuhiro

AU - Kojio, Ken

AU - Furukawa, Mutsuhisa

PY - 2005

Y1 - 2005

N2 - A series of eight blend poly(oxytetramethylene) glycols (PTMGs) with different polydispersity were prepared from three kinds of PTMGs with the number-average molecular weights of 278 or 642,1004, and 1918. The PUEs were prepared from the blend polymer glycols, 4,4'-diphenylmethane diisocyanate and 1,4-butanediol by a prepolymer method. The hard segment content of all PUEs was ca. 37 wt%. Thermal and mechanical properties of the PUEs were characterized by hardness, density, swelling test, gel permeation chromatography, differential scanning calorimetry, dynamic viscoelastic properties measurements, and tensile testing. With a broadening polydispersity of the soft segment, Tg of the soft segment shifted to low temperature, indicating that the phase separation became stronger. This induced a increasing Young's modulus and hardness of PUEs. Tensile strength and strain at break for the PUEs including the lowest molecular weight component (PTMG250) showed larger and smaller magnitudes, respectively. This is because PTMG250 played as physical crosslinking points and made network structure become heterogeneous.

AB - A series of eight blend poly(oxytetramethylene) glycols (PTMGs) with different polydispersity were prepared from three kinds of PTMGs with the number-average molecular weights of 278 or 642,1004, and 1918. The PUEs were prepared from the blend polymer glycols, 4,4'-diphenylmethane diisocyanate and 1,4-butanediol by a prepolymer method. The hard segment content of all PUEs was ca. 37 wt%. Thermal and mechanical properties of the PUEs were characterized by hardness, density, swelling test, gel permeation chromatography, differential scanning calorimetry, dynamic viscoelastic properties measurements, and tensile testing. With a broadening polydispersity of the soft segment, Tg of the soft segment shifted to low temperature, indicating that the phase separation became stronger. This induced a increasing Young's modulus and hardness of PUEs. Tensile strength and strain at break for the PUEs including the lowest molecular weight component (PTMG250) showed larger and smaller magnitudes, respectively. This is because PTMG250 played as physical crosslinking points and made network structure become heterogeneous.

UR - http://www.scopus.com/inward/record.url?scp=33645651574&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33645651574&partnerID=8YFLogxK

M3 - Conference contribution

VL - 54

SP - 1279

BT - 54th SPSJ Annual Meeting 2005 - Polymer Preprints, Japan

ER -