Researches relating to unconventional resource development and CCS

研究成果: ジャーナルへの寄稿評論記事

抄録

In recent years, in the development of unconventional resources such as oil sand and shale gas are being classified into the conventional resources using breakthrough of well-drilling technology, such as a horizontal wells and hydraulic fracturing. These technologies have been transferred to commercial productions of oil and gas. Engineering on producing mineral and fuel energy reserves at underground, below the sea bottom and beneath the seabed to the surface is referred to as “Mining and Petroleum Engineering”primarily focused on resource development and production systems that take into account economic efficiency, safety, and environmental preservation. These include methods of estimating the potential quantity of resources (ore and energy reserves) from distributions of grade or saturation as well as excavation and transportation systems. In this micro review, some researches on unconventional resource development and CCS were introduced.
元の言語英語
ページ(範囲)28-29
ページ数2
ジャーナルG-COE Program Kyushu University Novel Carbon Resource Sciences newsletter
8
出版物ステータス出版済み - 2 2013

Fingerprint

resource development
Well drilling
Oil shale
Oil sands
Hydraulic fracturing
Horizontal wells
resource
Excavation
Ores
Minerals
Crude oil
oil shale
oil sand
transportation system
production system
Economics
energy
excavation
Gases
petroleum

All Science Journal Classification (ASJC) codes

  • Fuel Technology
  • Global and Planetary Change
  • Earth and Planetary Sciences(all)

これを引用

@article{d5d21502f52d466fb3717f190f37954b,
title = "Researches relating to unconventional resource development and CCS",
abstract = "In recent years, in the development of unconventional resources such as oil sand and shale gas are being classified into the conventional resources using breakthrough of well-drilling technology, such as a horizontal wells and hydraulic fracturing. These technologies have been transferred to commercial productions of oil and gas. Engineering on producing mineral and fuel energy reserves at underground, below the sea bottom and beneath the seabed to the surface is referred to as “Mining and Petroleum Engineering”primarily focused on resource development and production systems that take into account economic efficiency, safety, and environmental preservation. These include methods of estimating the potential quantity of resources (ore and energy reserves) from distributions of grade or saturation as well as excavation and transportation systems. In this micro review, some researches on unconventional resource development and CCS were introduced.",
author = "Kyuro Sasaki",
year = "2013",
month = "2",
language = "English",
volume = "8",
pages = "28--29",
journal = "九州大学グローバルCOEプログラム新炭素資源学ニューズレター",
issn = "1884-6289",
publisher = "九州大学グローバルCOEプログラム拠点「新炭素資源学」事務局",

}

TY - JOUR

T1 - Researches relating to unconventional resource development and CCS

AU - Sasaki, Kyuro

PY - 2013/2

Y1 - 2013/2

N2 - In recent years, in the development of unconventional resources such as oil sand and shale gas are being classified into the conventional resources using breakthrough of well-drilling technology, such as a horizontal wells and hydraulic fracturing. These technologies have been transferred to commercial productions of oil and gas. Engineering on producing mineral and fuel energy reserves at underground, below the sea bottom and beneath the seabed to the surface is referred to as “Mining and Petroleum Engineering”primarily focused on resource development and production systems that take into account economic efficiency, safety, and environmental preservation. These include methods of estimating the potential quantity of resources (ore and energy reserves) from distributions of grade or saturation as well as excavation and transportation systems. In this micro review, some researches on unconventional resource development and CCS were introduced.

AB - In recent years, in the development of unconventional resources such as oil sand and shale gas are being classified into the conventional resources using breakthrough of well-drilling technology, such as a horizontal wells and hydraulic fracturing. These technologies have been transferred to commercial productions of oil and gas. Engineering on producing mineral and fuel energy reserves at underground, below the sea bottom and beneath the seabed to the surface is referred to as “Mining and Petroleum Engineering”primarily focused on resource development and production systems that take into account economic efficiency, safety, and environmental preservation. These include methods of estimating the potential quantity of resources (ore and energy reserves) from distributions of grade or saturation as well as excavation and transportation systems. In this micro review, some researches on unconventional resource development and CCS were introduced.

UR - http://ncrs.cm.kyushu-u.ac.jp/assets/files/Newsletter/volume_8/en/Newsletter8_E_%2028-29.pdf

M3 - Review article

VL - 8

SP - 28

EP - 29

JO - 九州大学グローバルCOEプログラム新炭素資源学ニューズレター

JF - 九州大学グローバルCOEプログラム新炭素資源学ニューズレター

SN - 1884-6289

ER -