Reverse micelle-based preparation of carbon-supported La 1-xSrxMn1-yFeyO3+δ for oxygen reduction electrode

M. Yuasa, G. Sakai, Kengo Shimanoe, Y. Teraoka, N. Yamazoe

研究成果: ジャーナルへの寄稿学術誌査読

19 被引用数 (Scopus)

抄録

La1-xSrxMn0.8Fe0.2O 3+δ (x = 0-0.4) and La0.8Sr0.2Mn 1-yFeyO3+δ (y = 0-0.8) supported on carbon were successfully prepared by a reverse micelle method. Aqueous solutions dissolving nitrates of constituent metals of the intended oxides and tetramethylammonium hydroxide (precipitant) were separately transformed into reverse micelle dispersions by using poly(oxyethylene)5-lauryl ether (surfactant) and cyclohexane (oil). These dispersions were mixed together to derive a reverse micelle dispersion containing mixed hydroxides as precursors of the oxides, into which carbon powder suspended in cyclohexane was put under agitation. The suspension was destabilized with ethanol, and the resulting precipitate (carbon-supported precursors) was calcined in N2 atmosphere to prevent the carbon matrix from being combusted. Single-phase oxides supported on carbon were obtained by calcination at 700°C unless the oxides were free of Fe. Oxygen reduction activity of the gas-diffusion-type electrodes fabricated with thus prepared carbon-supported oxides increased sharply and decreased gradually with increasing x and y, respectively. Among the prepared oxides, the greatest activity, i.e., 500 mA/cm2 at -67 mV (vs. Hg/HgO electrode) in 9 M NaOH at 85°C under O2 flow, was achieved by the oxide with x = 0.4 and y = 0.2. Optimal loading on carbon as well as durability under oxygen reduction conditions were tested for selected oxides. 17 wt % La0.6Sr0.4Mn0.8Fe 0.2O3+δ loading electrode was compared with 27.7 wt % Pt-loading electrode in an oxygen reduction activity, and it was found that the former electrode was better than the Pt loading electrode.

本文言語英語
ジャーナルJournal of the Electrochemical Society
151
10
DOI
出版ステータス出版済み - 11月 26 2004

!!!All Science Journal Classification (ASJC) codes

  • 電子材料、光学材料、および磁性材料
  • 再生可能エネルギー、持続可能性、環境
  • 表面、皮膜および薄膜
  • 電気化学
  • 材料化学

フィンガープリント

「Reverse micelle-based preparation of carbon-supported La 1-xSrxMn1-yFeyO3+δ for oxygen reduction electrode」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル