Separation of charge transfer and contact resistance in LiFePO 4-Cathodes by impedance Modeling

J. Illig, M. Ender, T. Chrobak, J. P. Schmidt, D. Klotz, E. Ivers-Tiffée

研究成果: Contribution to journalArticle査読

147 被引用数 (Scopus)

抄録

Lithium iron phosphate is a promising candidate material for Li-Ion batteries. In this study, the rate determining processes are assessed in more detail in order to separate performance limiting factors. Electrochemical impedance spectroscopy (EIS) data of experimental LiFePO4/Lithium- cells are deconvoluted by the method of distribution of relaxation times (DRT), what necessitates a pre-processing of the capacitive branch. This results in a separation into cathode and anode polarization processes and in a proposition of a physically motivated equivalent circuit model. We identify three different polarization processes of the LiFePO4-cathode (i) solid state diffusion, (ii) charge transfer (cathode/electrolyte) and (iii) contact resistance (cathode/current collector). Our model is then applied to EIS data sets covering varied temperature (0° to 30°C) and state of charge (10% to 100%). Activation energy, polarization resistance and frequency range are determined separately for all cathode processes involved. Finally, the tape-casted LiFePO4-cathode sheet is modified in porosity, thickness and contact area between cathode/electrolyte and cathode/current collector by a calendering process. Charge transfer resistance and contact resistance respond readily in polarization and relaxation frequency.

本文言語英語
ページ(範囲)A952-A960
ジャーナルJournal of the Electrochemical Society
159
7
DOI
出版ステータス出版済み - 2012
外部発表はい

All Science Journal Classification (ASJC) codes

  • 電子材料、光学材料、および磁性材料
  • 再生可能エネルギー、持続可能性、環境
  • 表面、皮膜および薄膜
  • 電気化学
  • 材料化学

フィンガープリント

「Separation of charge transfer and contact resistance in LiFePO <sub>4</sub>-Cathodes by impedance Modeling」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル