Shortening stabilization time using pressurized air flow in manufacturing mesophase pitch-based carbon fiber

研究成果: ジャーナルへの寄稿学術誌査読

11 被引用数 (Scopus)

抄録

Oxidation-stabilization using pressurized air flows of 0.5 and 1.0 MPa could successfully shorten the total stabilization time to less than 60 min for manufacturing mesophase pitch-based carbon fibers without deteriorating mechanical performance. Notably, the carbonized fiber heat-treated at 1000 °C for 30 min, which was oxidative-stabilized at 260 °C without soaking time with a heating rate of 2.0 °C/min using 100 mL/min of pressurized air flow of 0.5 MPa (total stabilization time: 55 min), showed excellent tensile strength and Young0s modulus of 3.4 and 177 GPa, respectively, which were higher than those of carbonized fiber oxidation-stabilized at 270 °C without soaking time with a heating rate of 0.5 °C/min using 100 mL/min of atmospheric air flow (total stabilization time: 300 min). Activation energies for oxidation reactions in stabilization using pressurized air flows were much lower than those of oxidation reactions using atmospheric air flow because of the higher oxidation diffusion from the outer surface into the center part of pitch fibers for the use of the pressurized air flows of 0.5 and 1.0 MPa than the atmospheric one. The higher oxygen diffusivities resulted in a more homogeneous distribution of oxygen weight uptake across the transverse section of mesophase pitch fibers, and allowed the improvement of the mechanical properties.

本文言語英語
論文番号1911
ジャーナルPolymers
11
12
DOI
出版ステータス出版済み - 12月 1 2019

!!!All Science Journal Classification (ASJC) codes

  • 化学 (全般)
  • ポリマーおよびプラスチック

フィンガープリント

「Shortening stabilization time using pressurized air flow in manufacturing mesophase pitch-based carbon fiber」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル