Simultaneous measurement of a blood flow and a contact pressure

Ryo Inoue, Hirofumi Nogami, Eiji Higurashi, Renshi Sawada

研究成果: 著書/レポートタイプへの貢献会議での発言

2 引用 (Scopus)

抄録

Although a number of laser Doppler blood flow sensors have been developed over the past few decades, they remain uncommon in practice. This is because the contact pressure between the skin and the sensor is not measured simultaneously with blood flow, despite the fact that blood flow is greatly affected by contact pressure. Thus, reliable and highly reproducible measurement of blood flow could not yet be realized. In addition, changes in beam conditions or body temperature also have an effect on blood flow measurement. Therefore, we fabricated a micro electro mechanical system (MEMS) blood flow sensor which can measure contact pressure, beam power, and body temperature, for reliable and highly reproducible measurement.

元の言語英語
ホスト出版物のタイトルBIOSIGNALS 2018 - 11th International Conference on Bio-Inspired Systems and Signal Processing, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018
編集者Hugo Gamboa, Sergi Bermudez i Badia, Giovanni Saggio, Ana Fred
出版者SciTePress
ページ48-53
ページ数6
ISBN(電子版)9789897582790
出版物ステータス出版済み - 1 1 2018
イベント11th International Conference on Bio-Inspired Systems and Signal Processing, BIOSIGNALS 2018 - Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018 - Funchal, Madeira, ポルトガル
継続期間: 1 19 20181 21 2018

出版物シリーズ

名前BIOSIGNALS 2018 - 11th International Conference on Bio-Inspired Systems and Signal Processing, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018
4

その他

その他11th International Conference on Bio-Inspired Systems and Signal Processing, BIOSIGNALS 2018 - Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018
ポルトガル
Funchal, Madeira
期間1/19/181/21/18

Fingerprint

Blood
Sensors
Flow measurement
Skin
Temperature
Lasers

All Science Journal Classification (ASJC) codes

  • Signal Processing
  • Biomedical Engineering
  • Electrical and Electronic Engineering

これを引用

Inoue, R., Nogami, H., Higurashi, E., & Sawada, R. (2018). Simultaneous measurement of a blood flow and a contact pressure. : H. Gamboa, S. Bermudez i Badia, G. Saggio, & A. Fred (版), BIOSIGNALS 2018 - 11th International Conference on Bio-Inspired Systems and Signal Processing, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018 (pp. 48-53). (BIOSIGNALS 2018 - 11th International Conference on Bio-Inspired Systems and Signal Processing, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018; 巻数 4). SciTePress.

Simultaneous measurement of a blood flow and a contact pressure. / Inoue, Ryo; Nogami, Hirofumi; Higurashi, Eiji; Sawada, Renshi.

BIOSIGNALS 2018 - 11th International Conference on Bio-Inspired Systems and Signal Processing, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018. 版 / Hugo Gamboa; Sergi Bermudez i Badia; Giovanni Saggio; Ana Fred. SciTePress, 2018. p. 48-53 (BIOSIGNALS 2018 - 11th International Conference on Bio-Inspired Systems and Signal Processing, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018; 巻 4).

研究成果: 著書/レポートタイプへの貢献会議での発言

Inoue, R, Nogami, H, Higurashi, E & Sawada, R 2018, Simultaneous measurement of a blood flow and a contact pressure. : H Gamboa, S Bermudez i Badia, G Saggio & A Fred (版), BIOSIGNALS 2018 - 11th International Conference on Bio-Inspired Systems and Signal Processing, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018. BIOSIGNALS 2018 - 11th International Conference on Bio-Inspired Systems and Signal Processing, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018, 巻. 4, SciTePress, pp. 48-53, 11th International Conference on Bio-Inspired Systems and Signal Processing, BIOSIGNALS 2018 - Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018, Funchal, Madeira, ポルトガル, 1/19/18.
Inoue R, Nogami H, Higurashi E, Sawada R. Simultaneous measurement of a blood flow and a contact pressure. : Gamboa H, Bermudez i Badia S, Saggio G, Fred A, 編集者, BIOSIGNALS 2018 - 11th International Conference on Bio-Inspired Systems and Signal Processing, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018. SciTePress. 2018. p. 48-53. (BIOSIGNALS 2018 - 11th International Conference on Bio-Inspired Systems and Signal Processing, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018).
Inoue, Ryo ; Nogami, Hirofumi ; Higurashi, Eiji ; Sawada, Renshi. / Simultaneous measurement of a blood flow and a contact pressure. BIOSIGNALS 2018 - 11th International Conference on Bio-Inspired Systems and Signal Processing, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018. 編集者 / Hugo Gamboa ; Sergi Bermudez i Badia ; Giovanni Saggio ; Ana Fred. SciTePress, 2018. pp. 48-53 (BIOSIGNALS 2018 - 11th International Conference on Bio-Inspired Systems and Signal Processing, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018).
@inproceedings{529205b1c6104bb8a9a7f3953ceeebe4,
title = "Simultaneous measurement of a blood flow and a contact pressure",
abstract = "Although a number of laser Doppler blood flow sensors have been developed over the past few decades, they remain uncommon in practice. This is because the contact pressure between the skin and the sensor is not measured simultaneously with blood flow, despite the fact that blood flow is greatly affected by contact pressure. Thus, reliable and highly reproducible measurement of blood flow could not yet be realized. In addition, changes in beam conditions or body temperature also have an effect on blood flow measurement. Therefore, we fabricated a micro electro mechanical system (MEMS) blood flow sensor which can measure contact pressure, beam power, and body temperature, for reliable and highly reproducible measurement.",
author = "Ryo Inoue and Hirofumi Nogami and Eiji Higurashi and Renshi Sawada",
year = "2018",
month = "1",
day = "1",
language = "English",
series = "BIOSIGNALS 2018 - 11th International Conference on Bio-Inspired Systems and Signal Processing, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018",
publisher = "SciTePress",
pages = "48--53",
editor = "Hugo Gamboa and {Bermudez i Badia}, Sergi and Giovanni Saggio and Ana Fred",
booktitle = "BIOSIGNALS 2018 - 11th International Conference on Bio-Inspired Systems and Signal Processing, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018",

}

TY - GEN

T1 - Simultaneous measurement of a blood flow and a contact pressure

AU - Inoue, Ryo

AU - Nogami, Hirofumi

AU - Higurashi, Eiji

AU - Sawada, Renshi

PY - 2018/1/1

Y1 - 2018/1/1

N2 - Although a number of laser Doppler blood flow sensors have been developed over the past few decades, they remain uncommon in practice. This is because the contact pressure between the skin and the sensor is not measured simultaneously with blood flow, despite the fact that blood flow is greatly affected by contact pressure. Thus, reliable and highly reproducible measurement of blood flow could not yet be realized. In addition, changes in beam conditions or body temperature also have an effect on blood flow measurement. Therefore, we fabricated a micro electro mechanical system (MEMS) blood flow sensor which can measure contact pressure, beam power, and body temperature, for reliable and highly reproducible measurement.

AB - Although a number of laser Doppler blood flow sensors have been developed over the past few decades, they remain uncommon in practice. This is because the contact pressure between the skin and the sensor is not measured simultaneously with blood flow, despite the fact that blood flow is greatly affected by contact pressure. Thus, reliable and highly reproducible measurement of blood flow could not yet be realized. In addition, changes in beam conditions or body temperature also have an effect on blood flow measurement. Therefore, we fabricated a micro electro mechanical system (MEMS) blood flow sensor which can measure contact pressure, beam power, and body temperature, for reliable and highly reproducible measurement.

UR - http://www.scopus.com/inward/record.url?scp=85050203958&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85050203958&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:85050203958

T3 - BIOSIGNALS 2018 - 11th International Conference on Bio-Inspired Systems and Signal Processing, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018

SP - 48

EP - 53

BT - BIOSIGNALS 2018 - 11th International Conference on Bio-Inspired Systems and Signal Processing, Proceedings; Part of 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018

A2 - Gamboa, Hugo

A2 - Bermudez i Badia, Sergi

A2 - Saggio, Giovanni

A2 - Fred, Ana

PB - SciTePress

ER -