Site-specific fabrication of polymer thin film by ink-jet method based on anisotropic wetting

Shieekazu Yasutake, Masamichi Morita, Hirotaka Ishizuka, Jun Fukai, Atsushi Takahara

研究成果: 会議への寄与タイプ論文

抄録

Line-patterned fluoroalkylsilane monolayer with liquidphilic/liquidphobic area (line width 1-20 micro meter) was prepared through VUV photolithography process. Liquidphilic and liquidphobic areas were terminated with silanol groups and fluoroalkyl groups, respectively. Microscopic droplets of a xylene solution of polystyrene (PS) were deposited on the micropatterned surface by the ink-jet method. On this surface, a macroscopic droplet of polymer solution shows anisotropic wetting behavior. While the contact lines of liquidphobic surface move in drying process of solvent, the contact lines of liquidphilic surface are fixed. Therefore, the PS thin films were selectively formed on the micropatterned liquidphilic areas. Formation of line-patterned PS thin films was investigated by optical and scanning force microscopy.

元の言語英語
ページ数1
出版物ステータス出版済み - 12 1 2005
イベント54th SPSJ Annual Meeting 2005 - Yokohama, 日本
継続期間: 5 25 20055 27 2005

その他

その他54th SPSJ Annual Meeting 2005
日本
Yokohama
期間5/25/055/27/05

Fingerprint

Polymer films
Ink
Wetting
Fabrication
Thin films
Polystyrenes
Photolithography
Xylene
Polymer solutions
Linewidth
Monolayers
Atomic force microscopy
Drying

All Science Journal Classification (ASJC) codes

  • Engineering(all)

これを引用

Yasutake, S., Morita, M., Ishizuka, H., Fukai, J., & Takahara, A. (2005). Site-specific fabrication of polymer thin film by ink-jet method based on anisotropic wetting. 論文発表場所 54th SPSJ Annual Meeting 2005, Yokohama, 日本.

Site-specific fabrication of polymer thin film by ink-jet method based on anisotropic wetting. / Yasutake, Shieekazu; Morita, Masamichi; Ishizuka, Hirotaka; Fukai, Jun; Takahara, Atsushi.

2005. 論文発表場所 54th SPSJ Annual Meeting 2005, Yokohama, 日本.

研究成果: 会議への寄与タイプ論文

Yasutake, S, Morita, M, Ishizuka, H, Fukai, J & Takahara, A 2005, 'Site-specific fabrication of polymer thin film by ink-jet method based on anisotropic wetting' 論文発表場所 54th SPSJ Annual Meeting 2005, Yokohama, 日本, 5/25/05 - 5/27/05, .
Yasutake S, Morita M, Ishizuka H, Fukai J, Takahara A. Site-specific fabrication of polymer thin film by ink-jet method based on anisotropic wetting. 2005. 論文発表場所 54th SPSJ Annual Meeting 2005, Yokohama, 日本.
Yasutake, Shieekazu ; Morita, Masamichi ; Ishizuka, Hirotaka ; Fukai, Jun ; Takahara, Atsushi. / Site-specific fabrication of polymer thin film by ink-jet method based on anisotropic wetting. 論文発表場所 54th SPSJ Annual Meeting 2005, Yokohama, 日本.1 p.
@conference{6bfb79ccb10c4278914e707818696abe,
title = "Site-specific fabrication of polymer thin film by ink-jet method based on anisotropic wetting",
abstract = "Line-patterned fluoroalkylsilane monolayer with liquidphilic/liquidphobic area (line width 1-20 micro meter) was prepared through VUV photolithography process. Liquidphilic and liquidphobic areas were terminated with silanol groups and fluoroalkyl groups, respectively. Microscopic droplets of a xylene solution of polystyrene (PS) were deposited on the micropatterned surface by the ink-jet method. On this surface, a macroscopic droplet of polymer solution shows anisotropic wetting behavior. While the contact lines of liquidphobic surface move in drying process of solvent, the contact lines of liquidphilic surface are fixed. Therefore, the PS thin films were selectively formed on the micropatterned liquidphilic areas. Formation of line-patterned PS thin films was investigated by optical and scanning force microscopy.",
author = "Shieekazu Yasutake and Masamichi Morita and Hirotaka Ishizuka and Jun Fukai and Atsushi Takahara",
year = "2005",
month = "12",
day = "1",
language = "English",
note = "54th SPSJ Annual Meeting 2005 ; Conference date: 25-05-2005 Through 27-05-2005",

}

TY - CONF

T1 - Site-specific fabrication of polymer thin film by ink-jet method based on anisotropic wetting

AU - Yasutake, Shieekazu

AU - Morita, Masamichi

AU - Ishizuka, Hirotaka

AU - Fukai, Jun

AU - Takahara, Atsushi

PY - 2005/12/1

Y1 - 2005/12/1

N2 - Line-patterned fluoroalkylsilane monolayer with liquidphilic/liquidphobic area (line width 1-20 micro meter) was prepared through VUV photolithography process. Liquidphilic and liquidphobic areas were terminated with silanol groups and fluoroalkyl groups, respectively. Microscopic droplets of a xylene solution of polystyrene (PS) were deposited on the micropatterned surface by the ink-jet method. On this surface, a macroscopic droplet of polymer solution shows anisotropic wetting behavior. While the contact lines of liquidphobic surface move in drying process of solvent, the contact lines of liquidphilic surface are fixed. Therefore, the PS thin films were selectively formed on the micropatterned liquidphilic areas. Formation of line-patterned PS thin films was investigated by optical and scanning force microscopy.

AB - Line-patterned fluoroalkylsilane monolayer with liquidphilic/liquidphobic area (line width 1-20 micro meter) was prepared through VUV photolithography process. Liquidphilic and liquidphobic areas were terminated with silanol groups and fluoroalkyl groups, respectively. Microscopic droplets of a xylene solution of polystyrene (PS) were deposited on the micropatterned surface by the ink-jet method. On this surface, a macroscopic droplet of polymer solution shows anisotropic wetting behavior. While the contact lines of liquidphobic surface move in drying process of solvent, the contact lines of liquidphilic surface are fixed. Therefore, the PS thin films were selectively formed on the micropatterned liquidphilic areas. Formation of line-patterned PS thin films was investigated by optical and scanning force microscopy.

UR - http://www.scopus.com/inward/record.url?scp=33645637888&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33645637888&partnerID=8YFLogxK

M3 - Paper

ER -