SOFC電極電解質積層材料のインプリント加工における微細界面形状の制御

徳丸 和樹, 津守 不二夫

研究成果: ジャーナルへの寄稿学術誌

抄録

<p>Solid oxide fuel cells (SOFC) is a fuel cell has the highest power generation performance, however, the energy density is lower than another type of fuel cells, and downsizing is necessary. By applying a pattern to the interface between the electrode and the electrolyte, it is possible to increase the amount of power generation per volume. In this study, imprint processing was performed on an electrode and electrolyte laminate material composed of particle dispersion resin, which is a material of SOFC, to concurrently impart a wave pattern of order of several micrometers to the electrolyte surface and the laminated interface. In addition, we will grasp the deformation behavior of the interfacial shape of laminated resin and try to control the interface shape.</p>
寄稿の翻訳タイトルControl of micro interface pattern shape in imprint processing of SOFC electrode and electrolyte laminate material
本文言語日本語
ページ(範囲)30pm4PN26
ジャーナルマイクロ・ナノ工学シンポジウム
2018
0
DOI
出版ステータス出版済み - 2018

フィンガープリント

「SOFC電極電解質積層材料のインプリント加工における微細界面形状の制御」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル