Solution and film properties of cellulose and cellulose acetate prepared using ionic liquid mixed solvent

Daisuke Tatsumi, Takeru Ishihara, Tetsuo Kondo, Dan Aoki, Kazuhiko Fukushima

研究成果: Contribution to journalArticle査読

1 被引用数 (Scopus)

抄録

Because of lacking at thermoplasticity in cellulose, it requires solution states for molding processing. A typical example is viscose, which requires the use of a multiple solvent system including toxic. In order to improve the disadvantage, cellulose was dissolved in an ionic liquid mixed solvent and its solution characteristics were evaluated in the present study. Another method for imparting thermoplasticity to cellulose is chemical modification. Thus, an attempt was also made to acetylate cellulose in the ionic liquid mixed cellulose solution. Despite the fact that the solvent contains dimethyl sulfoxide, which causes the Pummerer rearrangement preventing esterification, cellulose acetate with a degree of substitution of 2.7 or higher was successfully prepared. The films were prepared by coagulation of the solution, and the film characteristics were evaluated by measuring their viscoelasticity. It was found that cellulose and cellulose acetate films obtained from the solvent have almost the same viscoelastic properties as commercially available ones. In addition, the solution characteristic in the ionic liquid mixed solvent of the obtained cellulose acetate was examined.

本文言語英語
ページ(範囲)465-469
ページ数5
ジャーナルZairyo/Journal of the Society of Materials Science, Japan
69
6
DOI
出版ステータス出版済み - 6 2020

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

フィンガープリント 「Solution and film properties of cellulose and cellulose acetate prepared using ionic liquid mixed solvent」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル