Status of engineering design of liquid lithium target in IFMIF-EVEDA

Hiroo Nakamura, Pietro Agostini, Kuniaki Ara, Satoshi Fukada, Kazuyuki Furuya, Pascal Garin, Alessandro Gessi, David Giusti, Friedrich Groeschel, Hiroshi Horiike, Mizuho Ida, Takuji Kanenmura, Hiroo Kondo, Nikolai Loginov, Gioacchino Micciche, Makoto Miyashita, F. S. Nitti, Akihiro Suzuki, Takayuki Terai, Kazuhiro WatanabeJuro Yagi, Eiichi Yoshida, A. Mikheyev

研究成果: ジャーナルへの寄稿学術誌査読

29 被引用数 (Scopus)

抄録

In International Fusion Materials Irradiation Facility (IFMIF), intense neutron flux (4.5 × 1017 n/m2 s) with a peak energy of 14 MeV are produced by means of two deuteron beams with a total current of 250 mA and maximum energy of 40 MeV that strike a liquid Li target circulating in a Li loop. Major design requirement is to provide a stable Li jet at a speed of 10-20 m/s with a surface wave amplitude on the Li flow less than 1 mm for handling of an averaged heat flux of 1 GW/m2 under a continuous 10 MW deuterium beam deposition. The target system consists of a target assembly, a replaceable back-plate, a Li main loop and a Li purification loop. In July 2007, Engineering Validation and Engineering Design Activities (EVEDA) started under Broader Approach. In this paper, status of the engineering design of the IFMIF Li target system performed in 2007/2008 is described. The future EVEDA tasks to develop the target system are also summarized.

本文言語英語
ページ(範囲)252-258
ページ数7
ジャーナルFusion Engineering and Design
84
2-6
DOI
出版ステータス出版済み - 6月 2009

!!!All Science Journal Classification (ASJC) codes

  • 土木構造工学
  • 原子力エネルギーおよび原子力工学
  • 材料科学(全般)
  • 機械工学

フィンガープリント

「Status of engineering design of liquid lithium target in IFMIF-EVEDA」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル