Stress Analysis of Asymmetric Single Lap Joints

Kensuke Nono, Toshio Sugibayashi, Kiyomi Mori, Hiroaki Isono

研究成果: Contribution to journalArticle

2 引用 (Scopus)

抜粋

This paper describes an analysis of the influence of the adherends of different thicknesses and dissimilar materials on the stress distributiton of single lap joints rigidly supported at the joint edges under tensile load. Stress distributions and effects of Young's moduli of adherends and adherends thicknesses were investigated analytically and experimentally. Maximum shear normal stresses occur at the edge where the adhesive joints the adherend of lower inplane stiffiness. Experiments concerning the strains of adherends were performed. The analytical results were consistent with the FEM results and experimental results.

元の言語英語
ページ(範囲)646-653
ページ数8
ジャーナルTransactions of the Japan Society of Mechanical Engineers Series A
59
発行部数559
DOI
出版物ステータス出版済み - 1 1 1993

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

フィンガープリント Stress Analysis of Asymmetric Single Lap Joints' の研究トピックを掘り下げます。これらはともに一意のフィンガープリントを構成します。

  • これを引用