Structural evolution and deformation in an aluminum-based solid solution alloy with submicron grain size

Jingtao Wang, Zenji Horita, Minoru Nemoto, Minoru Furukawa, Ruslan Z. Valiev, Yan Ma, Terence G. Langdon

    研究成果: ジャーナルへの寄稿会議記事査読

    6 被引用数 (Scopus)

    抄録

    Superplastic ductilities may be achieved in tension using polycrystalline materials with small grain sizes (typically < 10μm). Experiments were conducted to evaluate the significance of the grain boundaries in an Al-3% Mg solid solution alloy with a submicron grain size (nearly0.2 μm). The material was produced by subjecting the alloy to severe plastic strain using a pressing technique. This paper describes the nature of the microstructure in the as-fabricated condition, the evolution of the microstructure as a function of time and/or temperature, and the effect of testing in tension at a temperature of 403 K.

    本文言語英語
    ページ(範囲)293-298
    ページ数6
    ジャーナルMaterials Research Society Symposium - Proceedings
    319
    出版ステータス出版済み - 1月 1 1994
    イベントProceedings of the MRS 1993 Fall Meeting - Boston, MA, USA
    継続期間: 11月 29 199312月 2 1993

    !!!All Science Journal Classification (ASJC) codes

    • 材料科学(全般)
    • 凝縮系物理学
    • 材料力学
    • 機械工学

    フィンガープリント

    「Structural evolution and deformation in an aluminum-based solid solution alloy with submicron grain size」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

    引用スタイル