STUDIES OF BOLTED FRICTIONAL-SLIPPAGE CONNECTION

Part1 Experiments of frictional-slippage connection using aluminum alloy sliding plates

研究成果: ジャーナルへの寄稿記事

抄録

In this paper, dynamic loading tests were conducted using the bolted frictional slippage connection specimens that sandwiched aluminum alloy sliding plates in order to investigate frictional slipping behavior such as the variation of slip coefficient while slipping and the influence of the initial bolt tension to the kinetic slip coefficient. As the result, specimens using high strength aluminum alloy sliding plates showed stable enough frictional slipping behavior rather than other two aluminum alloy sliding plates and the initial bolt tension had little influence on the slipping coefficient. In addition, in order to predict the slip coefficient of the specimen, a nonlinear regression equation was applied and its regression coefficients were obtained using nonlinear least squares fitting. This equitation predicted varying slip coefficient of specimens using high strength aluminum alloy approximately.
元の言語英語
ページ(範囲)217-222
ページ数6
ジャーナルJournal of Structural and Construction Engineering
68
発行部数573
DOI
出版物ステータス出版済み - 2003

Fingerprint

Aluminum alloys
High strength alloys
Bolts
Experiments
Kinetics

これを引用

@article{17d7a397f50740fd9fb278e7fabadfa6,
title = "STUDIES OF BOLTED FRICTIONAL-SLIPPAGE CONNECTION: Part1 Experiments of frictional-slippage connection using aluminum alloy sliding plates",
abstract = "In this paper, dynamic loading tests were conducted using the bolted frictional slippage connection specimens that sandwiched aluminum alloy sliding plates in order to investigate frictional slipping behavior such as the variation of slip coefficient while slipping and the influence of the initial bolt tension to the kinetic slip coefficient. As the result, specimens using high strength aluminum alloy sliding plates showed stable enough frictional slipping behavior rather than other two aluminum alloy sliding plates and the initial bolt tension had little influence on the slipping coefficient. In addition, in order to predict the slip coefficient of the specimen, a nonlinear regression equation was applied and its regression coefficients were obtained using nonlinear least squares fitting. This equitation predicted varying slip coefficient of specimens using high strength aluminum alloy approximately.",
author = "Tomokazu Yoshioka",
year = "2003",
doi = "10.3130/aijs.68.217",
language = "English",
volume = "68",
pages = "217--222",
journal = "Journal of Structural and Construction Engineering",
issn = "1340-4202",
publisher = "日本建築学会",
number = "573",

}

TY - JOUR

T1 - STUDIES OF BOLTED FRICTIONAL-SLIPPAGE CONNECTION

T2 - Part1 Experiments of frictional-slippage connection using aluminum alloy sliding plates

AU - Yoshioka, Tomokazu

PY - 2003

Y1 - 2003

N2 - In this paper, dynamic loading tests were conducted using the bolted frictional slippage connection specimens that sandwiched aluminum alloy sliding plates in order to investigate frictional slipping behavior such as the variation of slip coefficient while slipping and the influence of the initial bolt tension to the kinetic slip coefficient. As the result, specimens using high strength aluminum alloy sliding plates showed stable enough frictional slipping behavior rather than other two aluminum alloy sliding plates and the initial bolt tension had little influence on the slipping coefficient. In addition, in order to predict the slip coefficient of the specimen, a nonlinear regression equation was applied and its regression coefficients were obtained using nonlinear least squares fitting. This equitation predicted varying slip coefficient of specimens using high strength aluminum alloy approximately.

AB - In this paper, dynamic loading tests were conducted using the bolted frictional slippage connection specimens that sandwiched aluminum alloy sliding plates in order to investigate frictional slipping behavior such as the variation of slip coefficient while slipping and the influence of the initial bolt tension to the kinetic slip coefficient. As the result, specimens using high strength aluminum alloy sliding plates showed stable enough frictional slipping behavior rather than other two aluminum alloy sliding plates and the initial bolt tension had little influence on the slipping coefficient. In addition, in order to predict the slip coefficient of the specimen, a nonlinear regression equation was applied and its regression coefficients were obtained using nonlinear least squares fitting. This equitation predicted varying slip coefficient of specimens using high strength aluminum alloy approximately.

U2 - 10.3130/aijs.68.217

DO - 10.3130/aijs.68.217

M3 - Article

VL - 68

SP - 217

EP - 222

JO - Journal of Structural and Construction Engineering

JF - Journal of Structural and Construction Engineering

SN - 1340-4202

IS - 573

ER -