Studies on the evaluation of dowel-bearing strength for the manufacture of skin timber

Gwang Chul Kim, Chun Won Kang, Junji Matsumura

研究成果: Contribution to journalArticle査読

3 被引用数 (Scopus)

抄録

Korean prefers the post-and-beam construction with exposed very large-scale structural members to building with light wood frames, as with the 2-by-4 method of construction and pre-fabricated methods. One potential solution is the use of skin timbers. In this study, we performed experiments on with non-bored and bored small clear samples in order to determine the bearing strength of the bored specimens compared with the non-bored specimens and to determine the difference in performance between them as a function of the load direction. This study showed that when the clear small specimens were bored, their bearing strength was considerably reduced and there was a large difference in bearing strength between the parallel and perpendicular load directions. We conclude that additional research with full-sized Skin Timber is required.

本文言語英語
ページ(範囲)449-455
ページ数7
ジャーナルJournal of the Faculty of Agriculture, Kyushu University
54
2
出版ステータス出版済み - 10 1 2009

All Science Journal Classification (ASJC) codes

  • バイオテクノロジー
  • 農業および作物学

フィンガープリント

「Studies on the evaluation of dowel-bearing strength for the manufacture of skin timber」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル