Study of drag force acting on various types of dp jack-up vessel legs

Nitin D. Thulkar, Satoru Yamaguchi, Koki Ebihara

研究成果: 書籍/レポート タイプへの寄稿会議への寄与

抄録

The Dynamic Positioned (DP) Jack-up vessels currently use two popular designs of legs, (i.e. rack & chord lattices and cylindrical leg type). These two leg designs are popular and various experiment conducted in the past to evaluate the drag coefficient and drag force of these legs, but they are only available in a steady state condition. The intention of our experiment is to measure drag force and compare with CFD results. In DP vessels, mathematical model of the vessel first estimates the environmental force acting on the vessel, by using real time sensor data and then generate the counter balance thrust. The output command of force and angle is then sent to the available thrusters. However, usually, DP Jack-up vessels do not have sensor to measure the hydrodynamic force of leg &spudcan. Presently, each DP control system manufacturer for Jack-up vessels uses its own mathematical technique to achieve stability of station keeping during simultaneous operation of dynamic positioning and Jacking operation (SIMOPS). Moreover, this sensor less DP system tuning is unknown to the industries. Our intention of these experiments is to measure the hydrodynamic forces, in order to understand how the evaluated forces is altered under different environmental and operational conditions in SIMOPS operation. To start with, we first decided to measure drag forces when leg & spudcan moves in UP/DN direction under variable environment current. Both CFD and tank experiment is done using 3D prototype scale model of a cylindrical leg. The experimental limitation is also defined based on the tank facilities. The data is recorded during lowering and raising of the leg to see the effect on the drag force of leg-spudcan. The experimental data are recorded for current, leg speed; drag forces etc. with respect to time and average value considered for a steady state experimental case period. The evaluated results are compared with CFD results and show similar trends with acceptable error. The CFD analysis also carried out on a full-scale leg diameter to see the drag force trends. In order to understand the effect of seabed on the overall hydrodynamic force, cases were studied in which the leg was kept just a 0.1 m above seabed.

本文言語英語
ホスト出版物のタイトルProceedings of the 29th International Ocean and Polar Engineering Conference, ISOPE 2019
編集者Jin S. Chung, Odd M. Akselsen, HyunWoo Jin, Hiroyasu Kawai, Yongwon Lee, Dmitri Matskevitch, Suak Ho Van, Decheng Wan, Alan M. Wang, Satoru Yamaguchi
出版社International Society of Offshore and Polar Engineers
ページ2998-3004
ページ数7
ISBN(印刷版)9781880653852
出版ステータス出版済み - 2019
イベント29th International Ocean and Polar Engineering Conference, ISOPE 2019 - Honolulu, 米国
継続期間: 6月 16 20196月 21 2019

出版物シリーズ

名前Proceedings of the International Offshore and Polar Engineering Conference
3
ISSN(印刷版)1098-6189
ISSN(電子版)1555-1792

会議

会議29th International Ocean and Polar Engineering Conference, ISOPE 2019
国/地域米国
CityHonolulu
Period6/16/196/21/19

!!!All Science Journal Classification (ASJC) codes

  • エネルギー工学および電力技術
  • 海洋工学
  • 機械工学

フィンガープリント

「Study of drag force acting on various types of dp jack-up vessel legs」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル