Study on manufacturing technology of high strength concrete precast members with design standard strength of 300 N/MM2

Masaro Kojima, Daisuke Honma, Tomoyuki Koyama

研究成果: Contribution to journalArticle査読

抄録

This study conducted practical development of 300N/mm2 precast concrete. As a result, the followings were found to be important, lengthen mixing time for fluidity and strength development, sufficiently deforming of the specimen using vibrator, deforming by pressurizing and depressurizing with squeeze-type pump before casting the member, and protecting form direct steam in AC-curing tank. In addition, strength development can be evaluated by effective-age of over 20°C, and the curing patterns that can achieve compressive strength of 300N/mm2 and small shrinkage is to shorten the 90°C steam-curing time and apply 180°C AC-curing over 4 hours or 150°C AC-curing over 12 hours.

本文言語英語
ページ(範囲)24-29
ページ数6
ジャーナルAIJ Journal of Technology and Design
27
65
DOI
出版ステータス出版済み - 2 2021

All Science Journal Classification (ASJC) codes

  • 建築
  • 建築および建設

フィンガープリント

「Study on manufacturing technology of high strength concrete precast members with design standard strength of 300 N/MM<sup>2</sup>」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル