Superplasticity of Inconel 718 after processing by high-pressure sliding (HPS)

Yoichi Takizawa, Takahiro Kajita, Petr Kral, Takahiro Masuda, Kyohei Watanabe, Manabu Yumoto, Yoshiharu Otagiri, Vaclav Sklenicka, Zenji Horita

研究成果: ジャーナルへの寄稿記事

12 引用 (Scopus)

抄録

This study reports a production of a superplastic Ni-based superalloy (Inconel 718) using a process of severe plastic deformation through high-pressure sliding (HPS). The grain size of the alloy was reduced to ~120 nm by operating the HPS process under 4 GPa at room temperature with a recently upscaled facility. The ultrafined-grained structure was well retained even after annealing at 1173 K for 1 h. Tensile tests were conducted in air at a testing temperature in the range of 973–1173 K with an initial strain rate of 5.0×10−4–2.0×10−2 s−1. Superplastic elongation more than 400% were attained at all testing conditions except at 973 K. High-strain rate superplasticity (defined with strain rates higher than 1×10−2 s−1) was achieved at temperatures higher than 1073 K. Electron back scatter diffraction analyses revealed that a preferential orientation of the grains was developed by the HPS processing but it was randomized with tensile deformation. Evaluation of the strain rate sensitivity and the activation energy for the superplastic deformation confirmed that the superplasticity of Inconel 718 was controlled by grain boundary sliding through lattice diffusion.

元の言語英語
ページ(範囲)603-612
ページ数10
ジャーナルMaterials Science and Engineering A
682
DOI
出版物ステータス出版済み - 1 13 2017

Fingerprint

superplasticity
Inconel (trademark)
Superplasticity
strain rate
sliding
Strain rate
Processing
Superplastic deformation
tensile deformation
Grain boundary sliding
Testing
heat resistant alloys
tensile tests
Superalloys
Temperature
elongation
plastic deformation
Elongation
Plastic deformation
grain boundaries

All Science Journal Classification (ASJC) codes

  • Materials Science(all)
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

これを引用

Takizawa, Y., Kajita, T., Kral, P., Masuda, T., Watanabe, K., Yumoto, M., ... Horita, Z. (2017). Superplasticity of Inconel 718 after processing by high-pressure sliding (HPS). Materials Science and Engineering A, 682, 603-612. https://doi.org/10.1016/j.msea.2016.11.081

Superplasticity of Inconel 718 after processing by high-pressure sliding (HPS). / Takizawa, Yoichi; Kajita, Takahiro; Kral, Petr; Masuda, Takahiro; Watanabe, Kyohei; Yumoto, Manabu; Otagiri, Yoshiharu; Sklenicka, Vaclav; Horita, Zenji.

:: Materials Science and Engineering A, 巻 682, 13.01.2017, p. 603-612.

研究成果: ジャーナルへの寄稿記事

Takizawa, Y, Kajita, T, Kral, P, Masuda, T, Watanabe, K, Yumoto, M, Otagiri, Y, Sklenicka, V & Horita, Z 2017, 'Superplasticity of Inconel 718 after processing by high-pressure sliding (HPS)', Materials Science and Engineering A, 巻. 682, pp. 603-612. https://doi.org/10.1016/j.msea.2016.11.081
Takizawa, Yoichi ; Kajita, Takahiro ; Kral, Petr ; Masuda, Takahiro ; Watanabe, Kyohei ; Yumoto, Manabu ; Otagiri, Yoshiharu ; Sklenicka, Vaclav ; Horita, Zenji. / Superplasticity of Inconel 718 after processing by high-pressure sliding (HPS). :: Materials Science and Engineering A. 2017 ; 巻 682. pp. 603-612.
@article{16f9a76d078f40a28c4ef2b7777a212b,
title = "Superplasticity of Inconel 718 after processing by high-pressure sliding (HPS)",
abstract = "This study reports a production of a superplastic Ni-based superalloy (Inconel 718) using a process of severe plastic deformation through high-pressure sliding (HPS). The grain size of the alloy was reduced to ~120 nm by operating the HPS process under 4 GPa at room temperature with a recently upscaled facility. The ultrafined-grained structure was well retained even after annealing at 1173 K for 1 h. Tensile tests were conducted in air at a testing temperature in the range of 973–1173 K with an initial strain rate of 5.0×10−4–2.0×10−2 s−1. Superplastic elongation more than 400{\%} were attained at all testing conditions except at 973 K. High-strain rate superplasticity (defined with strain rates higher than 1×10−2 s−1) was achieved at temperatures higher than 1073 K. Electron back scatter diffraction analyses revealed that a preferential orientation of the grains was developed by the HPS processing but it was randomized with tensile deformation. Evaluation of the strain rate sensitivity and the activation energy for the superplastic deformation confirmed that the superplasticity of Inconel 718 was controlled by grain boundary sliding through lattice diffusion.",
author = "Yoichi Takizawa and Takahiro Kajita and Petr Kral and Takahiro Masuda and Kyohei Watanabe and Manabu Yumoto and Yoshiharu Otagiri and Vaclav Sklenicka and Zenji Horita",
year = "2017",
month = "1",
day = "13",
doi = "10.1016/j.msea.2016.11.081",
language = "English",
volume = "682",
pages = "603--612",
journal = "Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing",
issn = "0921-5093",
publisher = "Elsevier BV",

}

TY - JOUR

T1 - Superplasticity of Inconel 718 after processing by high-pressure sliding (HPS)

AU - Takizawa, Yoichi

AU - Kajita, Takahiro

AU - Kral, Petr

AU - Masuda, Takahiro

AU - Watanabe, Kyohei

AU - Yumoto, Manabu

AU - Otagiri, Yoshiharu

AU - Sklenicka, Vaclav

AU - Horita, Zenji

PY - 2017/1/13

Y1 - 2017/1/13

N2 - This study reports a production of a superplastic Ni-based superalloy (Inconel 718) using a process of severe plastic deformation through high-pressure sliding (HPS). The grain size of the alloy was reduced to ~120 nm by operating the HPS process under 4 GPa at room temperature with a recently upscaled facility. The ultrafined-grained structure was well retained even after annealing at 1173 K for 1 h. Tensile tests were conducted in air at a testing temperature in the range of 973–1173 K with an initial strain rate of 5.0×10−4–2.0×10−2 s−1. Superplastic elongation more than 400% were attained at all testing conditions except at 973 K. High-strain rate superplasticity (defined with strain rates higher than 1×10−2 s−1) was achieved at temperatures higher than 1073 K. Electron back scatter diffraction analyses revealed that a preferential orientation of the grains was developed by the HPS processing but it was randomized with tensile deformation. Evaluation of the strain rate sensitivity and the activation energy for the superplastic deformation confirmed that the superplasticity of Inconel 718 was controlled by grain boundary sliding through lattice diffusion.

AB - This study reports a production of a superplastic Ni-based superalloy (Inconel 718) using a process of severe plastic deformation through high-pressure sliding (HPS). The grain size of the alloy was reduced to ~120 nm by operating the HPS process under 4 GPa at room temperature with a recently upscaled facility. The ultrafined-grained structure was well retained even after annealing at 1173 K for 1 h. Tensile tests were conducted in air at a testing temperature in the range of 973–1173 K with an initial strain rate of 5.0×10−4–2.0×10−2 s−1. Superplastic elongation more than 400% were attained at all testing conditions except at 973 K. High-strain rate superplasticity (defined with strain rates higher than 1×10−2 s−1) was achieved at temperatures higher than 1073 K. Electron back scatter diffraction analyses revealed that a preferential orientation of the grains was developed by the HPS processing but it was randomized with tensile deformation. Evaluation of the strain rate sensitivity and the activation energy for the superplastic deformation confirmed that the superplasticity of Inconel 718 was controlled by grain boundary sliding through lattice diffusion.

UR - http://www.scopus.com/inward/record.url?scp=84998910280&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84998910280&partnerID=8YFLogxK

U2 - 10.1016/j.msea.2016.11.081

DO - 10.1016/j.msea.2016.11.081

M3 - Article

AN - SCOPUS:84998910280

VL - 682

SP - 603

EP - 612

JO - Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing

JF - Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing

SN - 0921-5093

ER -