Surface catalytic effect of electrode materials on ozone dissociation in a cylindrical dielectric barrier discharge ozonizer

Ta Lun Sung, Shinriki Teii, Chung Ming Liu, Ruey Chang Hsiao, Pao Chi Chen, Yu Heng Wu, Chih Kai Yang, Shigeru Ono, Kenji Ebihara, Kungen Teii

研究成果: Contribution to journalArticle査読

17 被引用数 (Scopus)

抄録

The effect of electrode materials on ozone dissociation is studied by using the electrodes made of stainless steel, copper, and carbon in a coaxial cylindrical-type dielectric barrier discharge ozonizer. The gas and electrode surface temperatures as well as the ozone concentration generated in the ozonizer are measured with varying the applied pulse voltage. The results show that the surface temperature for a stainless steel electrode decreases sharply by more than 10 °as the discharge begins to generate ozone. This is explained reasonably by the dissociation of ozone at the catalytic stainless steel electrode surface, which takes away a large amount of heat from the electrode surface. The decrease of temperature for the less catalytic copper electrode is only about 3°,and the temperature remains almost unchanged for the noncatalytic carbon electrode. Moreover, the ozone concentrations with the copper and carbon electrodes are approximately twice as high as that with the stainless steel electrode at the same voltage. This is attributed to a decrease in catalytic dissociation of ozone at the copper and carbon electrode surfaces, thus affecting the ozone yield.

本文言語英語
論文番号6293908
ページ(範囲)2751-2755
ページ数5
ジャーナルIEEE Transactions on Plasma Science
40
10 PART 2
DOI
出版ステータス出版済み - 2012

All Science Journal Classification (ASJC) codes

  • 核物理学および高エネルギー物理学
  • 凝縮系物理学

フィンガープリント

「Surface catalytic effect of electrode materials on ozone dissociation in a cylindrical dielectric barrier discharge ozonizer」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル