Surface modification and sputtering erosion of reduced activation ferritic martensitic steel F82H exposed to low-energy, high flux deuterium plasma

V. Kh Alimov, Y. Hatano, N. Yoshida, H. Watanabe, M. Oyaidzu, M. Tokitani, T. Hayashi

研究成果: ジャーナルへの寄稿学術誌査読

25 被引用数 (Scopus)

抄録

Targets prepared from Reduced Activation Ferritic Martensitic (RAFM) steel F82H were exposed to low-energy (200eV) deuterium (D) plasma at various temperatures with highfluxes of about 1022 D/m2s to various fluences in the range from 1025 to 2.5×1026 D/m2. Under the plasma exposure, micro-structured layers are formed on the target surfaces, and the surface morphology is dependent on the exposure temperature. The erosion yield of the F82H samples increases by a factor of about two as the exposure temperature rises in the range from 403 to 773K.

本文言語英語
ページ(範囲)25-32
ページ数8
ジャーナルNuclear Materials and Energy
7
DOI
出版ステータス出版済み - 5月 1 2016

!!!All Science Journal Classification (ASJC) codes

  • 核物理学および高エネルギー物理学
  • 材料科学(その他)
  • 原子力エネルギーおよび原子力工学

フィンガープリント

「Surface modification and sputtering erosion of reduced activation ferritic martensitic steel F82H exposed to low-energy, high flux deuterium plasma」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル