Surface reactivity of octacalcium phosphate-derived fluoride-containing apatite in the presence of polyols and fluoride

Sei Tsutsui, Takahisa Anada, Yukari Shiwaku, Kaori Tsuchiya, Hajime Yamazaki, Osamu Suzuki

研究成果: ジャーナルへの寄稿記事

2 引用 (Scopus)

抄録

The present study was designed to characterize co-precipitated fluoridated apatitic materials from octacalcium phosphate (OCP) precursor and to investigate their surface reactions with polyols including glycerol in the presence of fluoride ions. Laboratory-synthesized fluoridated apatite crystals (LS-FA) were obtained in a solution containing fluoride (F) from 25 to 500 ppm. LS-FAs and commercially available fluoroapatite (FA) and hydroxyapatite (HA) were characterized by physical techniques, such as X-ray diffraction. LS-FA obtained in the presence of 100 ppmF (100 ppm-LS-FA) had an apatitic structure, but its solubility was close to HA in a culture medium (α-MEM) despite the fact it contains over 3 wt % of F. 100 ppm-LS-FA, FA, and HA were then subjected to the human serum albumin (HSA) adsorption test at pH 7.4 (in a 150 mM Tris–HCl buffer) and the dissolution and re-mineralization experiments in the presence of xylitol, D-sorbitol, or glycerol, and F under acidic and neutral conditions. Adsorption affinity of HSA was estimated as highest for FA and lowest for LS-FA. LS-FA, FA, and HA were immersed in a lactic acid solution with the polyols and/or F ion-containing solution up to 200 ppm to analyze the dissolution behavior. LS-FA had the highest dissolution tendency in the conditions examined. Glycerol enhanced the dissolution of phosphate from apatite crystals in particular from LS-FA. The results suggest that the apatite crystals, obtained through the hydrolysis of OCP in the presence of F, provide a more reactive surface than FA or HA under physiological environments.

元の言語英語
ページ(範囲)2235-2244
ページ数10
ジャーナルJournal of Biomedical Materials Research - Part B Applied Biomaterials
106
発行部数6
DOI
出版物ステータス出版済み - 8 1 2018
外部発表Yes

Fingerprint

Apatites
Polyols
Apatite
Fluorides
Phosphates
Crystals
Durapatite
Hydroxyapatite
Dissolution
Glycerol
Serum Albumin
polyol
octacalcium phosphate
Ions
Xylitol
Adsorption
Sorbitol
Surface reactions
Lactic acid
Culture Media

All Science Journal Classification (ASJC) codes

  • Biomaterials
  • Biomedical Engineering

これを引用

Surface reactivity of octacalcium phosphate-derived fluoride-containing apatite in the presence of polyols and fluoride. / Tsutsui, Sei; Anada, Takahisa; Shiwaku, Yukari; Tsuchiya, Kaori; Yamazaki, Hajime; Suzuki, Osamu.

:: Journal of Biomedical Materials Research - Part B Applied Biomaterials, 巻 106, 番号 6, 01.08.2018, p. 2235-2244.

研究成果: ジャーナルへの寄稿記事

@article{ae63901b6057451b862ba0ab72b7090f,
title = "Surface reactivity of octacalcium phosphate-derived fluoride-containing apatite in the presence of polyols and fluoride",
abstract = "The present study was designed to characterize co-precipitated fluoridated apatitic materials from octacalcium phosphate (OCP) precursor and to investigate their surface reactions with polyols including glycerol in the presence of fluoride ions. Laboratory-synthesized fluoridated apatite crystals (LS-FA) were obtained in a solution containing fluoride (F) from 25 to 500 ppm. LS-FAs and commercially available fluoroapatite (FA) and hydroxyapatite (HA) were characterized by physical techniques, such as X-ray diffraction. LS-FA obtained in the presence of 100 ppmF (100 ppm-LS-FA) had an apatitic structure, but its solubility was close to HA in a culture medium (α-MEM) despite the fact it contains over 3 wt {\%} of F. 100 ppm-LS-FA, FA, and HA were then subjected to the human serum albumin (HSA) adsorption test at pH 7.4 (in a 150 mM Tris–HCl buffer) and the dissolution and re-mineralization experiments in the presence of xylitol, D-sorbitol, or glycerol, and F under acidic and neutral conditions. Adsorption affinity of HSA was estimated as highest for FA and lowest for LS-FA. LS-FA, FA, and HA were immersed in a lactic acid solution with the polyols and/or F ion-containing solution up to 200 ppm to analyze the dissolution behavior. LS-FA had the highest dissolution tendency in the conditions examined. Glycerol enhanced the dissolution of phosphate from apatite crystals in particular from LS-FA. The results suggest that the apatite crystals, obtained through the hydrolysis of OCP in the presence of F, provide a more reactive surface than FA or HA under physiological environments.",
author = "Sei Tsutsui and Takahisa Anada and Yukari Shiwaku and Kaori Tsuchiya and Hajime Yamazaki and Osamu Suzuki",
year = "2018",
month = "8",
day = "1",
doi = "10.1002/jbm.b.34026",
language = "English",
volume = "106",
pages = "2235--2244",
journal = "Journal of Biomedical Materials Research - Part B Applied Biomaterials",
issn = "1552-4973",
number = "6",

}

TY - JOUR

T1 - Surface reactivity of octacalcium phosphate-derived fluoride-containing apatite in the presence of polyols and fluoride

AU - Tsutsui, Sei

AU - Anada, Takahisa

AU - Shiwaku, Yukari

AU - Tsuchiya, Kaori

AU - Yamazaki, Hajime

AU - Suzuki, Osamu

PY - 2018/8/1

Y1 - 2018/8/1

N2 - The present study was designed to characterize co-precipitated fluoridated apatitic materials from octacalcium phosphate (OCP) precursor and to investigate their surface reactions with polyols including glycerol in the presence of fluoride ions. Laboratory-synthesized fluoridated apatite crystals (LS-FA) were obtained in a solution containing fluoride (F) from 25 to 500 ppm. LS-FAs and commercially available fluoroapatite (FA) and hydroxyapatite (HA) were characterized by physical techniques, such as X-ray diffraction. LS-FA obtained in the presence of 100 ppmF (100 ppm-LS-FA) had an apatitic structure, but its solubility was close to HA in a culture medium (α-MEM) despite the fact it contains over 3 wt % of F. 100 ppm-LS-FA, FA, and HA were then subjected to the human serum albumin (HSA) adsorption test at pH 7.4 (in a 150 mM Tris–HCl buffer) and the dissolution and re-mineralization experiments in the presence of xylitol, D-sorbitol, or glycerol, and F under acidic and neutral conditions. Adsorption affinity of HSA was estimated as highest for FA and lowest for LS-FA. LS-FA, FA, and HA were immersed in a lactic acid solution with the polyols and/or F ion-containing solution up to 200 ppm to analyze the dissolution behavior. LS-FA had the highest dissolution tendency in the conditions examined. Glycerol enhanced the dissolution of phosphate from apatite crystals in particular from LS-FA. The results suggest that the apatite crystals, obtained through the hydrolysis of OCP in the presence of F, provide a more reactive surface than FA or HA under physiological environments.

AB - The present study was designed to characterize co-precipitated fluoridated apatitic materials from octacalcium phosphate (OCP) precursor and to investigate their surface reactions with polyols including glycerol in the presence of fluoride ions. Laboratory-synthesized fluoridated apatite crystals (LS-FA) were obtained in a solution containing fluoride (F) from 25 to 500 ppm. LS-FAs and commercially available fluoroapatite (FA) and hydroxyapatite (HA) were characterized by physical techniques, such as X-ray diffraction. LS-FA obtained in the presence of 100 ppmF (100 ppm-LS-FA) had an apatitic structure, but its solubility was close to HA in a culture medium (α-MEM) despite the fact it contains over 3 wt % of F. 100 ppm-LS-FA, FA, and HA were then subjected to the human serum albumin (HSA) adsorption test at pH 7.4 (in a 150 mM Tris–HCl buffer) and the dissolution and re-mineralization experiments in the presence of xylitol, D-sorbitol, or glycerol, and F under acidic and neutral conditions. Adsorption affinity of HSA was estimated as highest for FA and lowest for LS-FA. LS-FA, FA, and HA were immersed in a lactic acid solution with the polyols and/or F ion-containing solution up to 200 ppm to analyze the dissolution behavior. LS-FA had the highest dissolution tendency in the conditions examined. Glycerol enhanced the dissolution of phosphate from apatite crystals in particular from LS-FA. The results suggest that the apatite crystals, obtained through the hydrolysis of OCP in the presence of F, provide a more reactive surface than FA or HA under physiological environments.

UR - http://www.scopus.com/inward/record.url?scp=85052577210&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85052577210&partnerID=8YFLogxK

U2 - 10.1002/jbm.b.34026

DO - 10.1002/jbm.b.34026

M3 - Article

C2 - 29076293

AN - SCOPUS:85052577210

VL - 106

SP - 2235

EP - 2244

JO - Journal of Biomedical Materials Research - Part B Applied Biomaterials

JF - Journal of Biomedical Materials Research - Part B Applied Biomaterials

SN - 1552-4973

IS - 6

ER -