TY - JOUR
T1 - Synthesis and electrical characterization of n -type carbon nanowalls
AU - Teii, Kungen
AU - Shimada, Shozaburo
AU - Nakashima, Masahiro
AU - Chuang, Alfred T.H.
N1 - Funding Information:
This research was supported partly by a Grant-in-Aid for Scientific Research from Japan Society for the Promotion of Science. K.T. acknowledges funding from the Murata Science Foundation. S.S acknowledges funding from the Academic Challenge Program of the Venture Business Laboratory at Kyushu University.
PY - 2009
Y1 - 2009
N2 - Nitrogen-incorporated carbon nanowalls are prepared by microwave plasma-enhanced chemical vapor deposition using acetylene and methane. n -type conduction in the nanowalls is confirmed by Hall- and Seebeck-effect measurements. We show that increasing the amount of C2 radicals by adding Ar enables catalyst-free growth of nanowalls at a high rate up to about 1 μm/min and reduces the deposition temperature (TD) down to around 650 °C. A substrate pretreatment using diamond powder results in a composite of nanowalls and nanocrystalline diamond films, suggesting that the nanowall growth is limited by gas-phase conditions rather than surface conditions. The low conductivity nanowalls for low TD exhibit thermal activation in the Arrhenius plot, indicative of semiconducting conduction, while the high conductivity nanowalls for high TD are almost temperature independent, indicative of quasimetallic conduction. The high conductivity is attributed to a global increase in the s p2 cluster size and crystallinity, which is responsible for increasing delocalization of defect states associated with π bonding and, hence, quasimetallic character.
AB - Nitrogen-incorporated carbon nanowalls are prepared by microwave plasma-enhanced chemical vapor deposition using acetylene and methane. n -type conduction in the nanowalls is confirmed by Hall- and Seebeck-effect measurements. We show that increasing the amount of C2 radicals by adding Ar enables catalyst-free growth of nanowalls at a high rate up to about 1 μm/min and reduces the deposition temperature (TD) down to around 650 °C. A substrate pretreatment using diamond powder results in a composite of nanowalls and nanocrystalline diamond films, suggesting that the nanowall growth is limited by gas-phase conditions rather than surface conditions. The low conductivity nanowalls for low TD exhibit thermal activation in the Arrhenius plot, indicative of semiconducting conduction, while the high conductivity nanowalls for high TD are almost temperature independent, indicative of quasimetallic conduction. The high conductivity is attributed to a global increase in the s p2 cluster size and crystallinity, which is responsible for increasing delocalization of defect states associated with π bonding and, hence, quasimetallic character.
UR - http://www.scopus.com/inward/record.url?scp=70350723499&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=70350723499&partnerID=8YFLogxK
U2 - 10.1063/1.3238276
DO - 10.1063/1.3238276
M3 - Article
AN - SCOPUS:70350723499
SN - 0021-8979
VL - 106
JO - Journal of Applied Physics
JF - Journal of Applied Physics
IS - 8
M1 - 084303
ER -