Synthesis of LiNH2 + LiH by reactive milling of Li3N

Christian Bonatto Minella, Carine Rongeat, Roger Domènech-Ferrer, Inge Lindemann, Lothar Dunsch, Natalie Sorbie, Duncan H. Gregory, Oliver Gutfleisch

研究成果: Contribution to journalArticle査読

8 被引用数 (Scopus)

抄録

The hydrogen sorption properties of Li3N under reactive milling conditions have been investigated in- and ex-situ as a function of polytype structure (α vs. β), focusing on the influence of the micro-structure and/or the crystal structure upon hydrogen uptake. LiNH2 and LiH were synthesized by reactive milling of Li3N at 20 bar hydrogen pressure for 4 h. Reactive milling represents a quick and effective technique to produce LiNH2 by hydrogenation of Li3N at low hydrogen pressure and without any need for heating. As to our knowledge, we present a full hydrogenation of Li3N under the aforementioned conditions for the first time. The (de)hydrogenation and rehydrogenation behaviour of milled amides was evaluated using a combination of powder X-ray diffraction, differential scanning calorimetry, thermogravimetry and in situ Raman spectroscopy. In situ Raman spectroscopy showed a shift in the lithium amide stretching modes upon hydrogenation supporting a non-stoichiometric storage mechanism consistent with the literature. The microstructure and polytype composition of the Li3N dehydrogenated materials had no effect on the hydrogenation products and only minor effects on the hydrogen uptake profile during milling.

本文言語英語
ページ(範囲)253-262
ページ数10
ジャーナルFaraday Discussions
151
DOI
出版ステータス出版済み - 2011

All Science Journal Classification (ASJC) codes

  • 物理化学および理論化学

フィンガープリント

「Synthesis of LiNH<sub>2</sub> + LiH by reactive milling of Li<sub>3</sub>N」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル