Synthesis of single-walled carbon nanotubes using laser-vaporized metal nanoparticle catalyst

Masamichi Kohno, Teppei Kawahara, Masahiro Tomoda, Yasuyuki Takata, Shuhei Inoue, Shinzo Suzuki, Shigeo Maruyama

研究成果: Contribution to journalArticle査読

2 被引用数 (Scopus)

抄録

SWNTs were synthesized by laser-vaporized CCVD (catalytic chemical vapor deposition). The diameter distributions and the abundance of SWNTs synthesized at different temperatures and using different catalysts were investigated by Raman spectroscopy. Further, this technique was compared with other synthesis techniques (laser-oven and conventional-alcohol CCVD), and C60 was synthesized simultaneously as a byproduct only using the laser-oven technique. With increasing synthesis temperature, the diameter distribution shifted towards larger diameters, and the G/D ratio became larger as the synthesis temperature increased to 1000°C. Ni, Co, and Fe played a catalytic role, though Fe was less effective under our experimental conditions. The diameter distribution of SWNTs synthesized with the Fe catalyst was shifted to smaller values compared to those synthesized with Ni or Co catalysts.

本文言語英語
ページ(範囲)11-15
ページ数5
ジャーナルJournal of Mechanical Science and Technology
25
1
DOI
出版ステータス出版済み - 1 2011

All Science Journal Classification (ASJC) codes

  • Mechanics of Materials
  • Mechanical Engineering

フィンガープリント 「Synthesis of single-walled carbon nanotubes using laser-vaporized metal nanoparticle catalyst」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル