Tatistical evaluation of geotechnical correlations

Waled A. Daoud, Kiyonobu Kasama, Naser M. Saleh, Abdelazim M. Negm

研究成果: ジャーナルへの寄稿記事

1 引用 (Scopus)

抜粋

Geotechnical correlations are widely used because it can provide fast and cost-effective means of parameter estimation using simple tests. Most of the current correlations were derived from data fitting of measurements for specific site conditions and need to be evaluated before used in other sites. During the correlation development, the deviation of the correlation from the measured values was evaluated using simple statistical measures. A better method of correlation evaluation may reduce the overall deviation of the geotechnical parameter. Amended Theil Inequality Coefficient (ATIC) is proposed as an evaluation tool because it has the advantage that it considers both position and trend conformities between observed and correlated values. To address the efficiency and rationality of ATIC, evaluation of, 92 compression index correlations by ATIC and different statistical measures was carried out. Comparison between the results showed that ATIC is efficient in assessing the best and worst correlations and it can be considered a good tool for correlations evaluation.

元の言語英語
ページ(範囲)1929-1935
ページ数7
ジャーナルInternational Journal of GEOMATE
10
発行部数3
出版物ステータス出版済み - 1 1 2016

    フィンガープリント

All Science Journal Classification (ASJC) codes

  • Environmental Engineering
  • Building and Construction
  • Geotechnical Engineering and Engineering Geology
  • Soil Science

これを引用

Daoud, W. A., Kasama, K., Saleh, N. M., & Negm, A. M. (2016). Tatistical evaluation of geotechnical correlations. International Journal of GEOMATE, 10(3), 1929-1935.